What is an Audi Q4 e-tron FY airbag control unit?
The Audi Q4 e-tron FY airbag control unit is the central safety unit that precisely activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors data from sensors, stores relevant crash information, and ensures the proper functioning of the entire safety system to achieve maximum protection.
It is integrally connected to front, side, head, and center vehicle sensors. These sensors continuously provide acceleration and pressure data, which are evaluated by the control unit.
The module controls front airbags, side airbags, head airbags, optional center airbags, and seatbelt pretensioners. It ensures coordinated activation of all relevant safety systems.
An integrated emergency power supply ensures activation even in the event of a main power failure. This is crucial for functionality in critical situations.
Why is the Audi Q4 e-tron FY airbag control unit defective?
An Audi Q4 e-tron FY airbag control unit can be defective because it permanently stores crash data after an accident, necessitating reprogramming or replacement. Internal electronic errors, communication problems in the vehicle's network, or voltage spikes can also lead to failure and necessitate repair.
Airbag control units are often blocked after an airbag deployment because they permanently store accident data in their memory. This data must be professionally erased before reuse.
A defective control unit can also be indicated by persistent airbag warning lights or unexplained error messages. This indicates internal malfunctions.
Repairing the Audi Q4 e-tron FY airbag control unit is essential to restore the full functionality of the passive safety systems and ensure vehicle safety.
Common error codes for Audi Q4 e-tron FY airbag control unit repair
When repairing the Audi Q4 e-tron FY airbag control unit, error codes typically occur that indicate communication problems, faults in the driver's ignition circuits, or malfunctions in the seatbelt switches. These specific codes allow for targeted diagnosis of the control unit.
- B1000 → Control unit communication error → Problems in the data connection of the airbag control unit.
- B100101 → Airbag igniter 2 – driver side electrical malfunction → Electrical fault in the driver airbag igniter circuit.
- B100111 → Airbag igniter 2 – driver side short circuit → Short circuit in the ignition circuit of the driver airbag.
- B101C13 → Driver side seat belt switch open wire → Open circuit in the driver side seat belt switch wiring.
- B101C15 → Driver side seat belt switch short circuit or open wire → Electrical fault in the driver side seat belt switch circuit.
- B101C29 → Driver side seat belt switch implausible signal → Inconsistent signals from the driver side seat belt switch.
- B101D01 → Passenger side seat belt switch electrical malfunction → Electrical malfunction in the passenger side seat belt switch.
- B101D11 → Passenger side seat belt switch short circuit to ground → Short circuit in the passenger side seat belt switch to vehicle ground.
- B101D12 → Passenger side seat belt switch short circuit to plus → Short circuit in the passenger side seat belt switch to positive voltage.
- B101D13 → Passenger side seat belt switch open wire → Open circuit in the wiring of the passenger side seat belt switch.
These codes help the workshop precisely identify the cause of the Audi Q4 e-tron FY airbag control unit failure. They are specific to internal control unit or directly connected switch problems.
Error codes for crash sensors, seat occupancy, or belt tensioners are explicitly excluded, as these codes relate exclusively to the airbag control unit itself. A precise diagnosis is crucial for a successful repair.
What part numbers are available for the Audi Q4 e-tron FY airbag control unit repair?
For the repair or replacement of an Audi Q4 e-tron FY airbag control unit, two original Audi OEM part numbers are currently verified: 1EA959655CE and 1EA959655EA. These ensure 100% compatibility and functionality in the vehicle and are confirmed directly by official Audi sources.
Part number 1EA959655CE is a genuine Audi OEM airbag control unit. It was specifically developed for the Audi Q4 e-tron FY and is sold by Audi dealers.
Likewise, part number 1EA959655EA is a verified genuine Audi OEM component. Both numbers are intended exclusively for the airbag control unit and not for sensors or other modules.
These part numbers ensure you receive the correct replacement part for your Audi Q4 e-tron FY airbag control unit. Using unverified parts may compromise safety and functionality.
Compatibility of the Audi Q4 e-tron FY airbag control unit
The Audi Q4 e-tron FY airbag control unit is specifically designed for the all-electric SUV model Audi Q4 e-tron FY and its Sportback variant. It is suitable for models from 2021 to at least 2025, although exact software compatibility may vary depending on the equipment.
This control unit fits both the regular Audi Q4 e-tron FY sedan and the Audi Q4 Sportback e-tron. Both body variants use the same airbag control unit.
A professional diagnosis is recommended before repairing the Audi Q4 e-tron FY airbag control unit. This ensures that the correct replacement part and software version are selected.
Installation position and connections of the Audi Q4 e-tron FY airbag control unit
The Audi Q4 e-tron FY airbag control unit is typically installed centrally in the vehicle interior, often under the center console or in the center tunnel area. It features multi-pin connectors for airbags and sensors, as well as a direct power supply for reliable operation in the event of a repair.
The central installation position near the center of the vehicle is crucial. This allows for optimal detection of impact forces by the connected sensors.
The connections include connections to front, side, head, and center airbags. Interfaces to various acceleration and pressure sensors are also available throughout the vehicle.
A direct and fused power supply from the vehicle battery is standard. An OBD interface also enables diagnostics and programming of the Audi Q4 e-tron FY airbag control unit after repair.