What is an Audi A5 8T airbag control unit?
The Audi A5 8T airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle, which is essential for safety.
It controls the precise deployment of airbags and seat belt pretensioners based on data provided by acceleration and impact sensors.
Communication with other vehicle systems takes place via the CAN bus, while power is supplied directly from the vehicle battery with integrated fuse protection.
Safety mechanisms such as automatic short-circuit clips on the airbag connectors prevent accidental deployment. The vehicle-specific software also stores all relevant diagnostic and accident data.
The typical installation position of the control unit in the Audi A5 8T is in the center console, often under the center armrest or near the transmission tunnel, where it is protected.
Why is the Audi A5 8T airbag control unit defective?
An Audi A5 8T airbag control unit is often defective because it stores crash data after an accident that cannot be erased without special repair, or because internal components fail due to age. Overvoltage or short circuits can also lead to failure, necessitating an Audi A5 8T airbag control unit repair.
The most common reason for failure is a stored crash record after an accident that permanently activates the airbag warning light.
Internal electronic errors or software problems that manifest themselves as sporadic failures or non-erasable error codes are also common causes of a broken control unit.
Sometimes, moisture ingress or mechanical damage can also lead to malfunctions. An incorrect power supply can affect the lifespan of the control unit.
Common error codes for Audi A5 8T airbag control unit repair
When repairing the Audi A5 8T airbag control unit, certain error codes are typical. These directly indicate a malfunction in the control unit and require immediate diagnosis. These codes often indicate an internal defect or an unrecoverable fault that compromises safety.
- 65535 → Control unit defective → Internal error in the airbag ECU, often not erasable after an accident.
- B200049 → Control unit defective → General hardware or software error of the airbag module.
- A00049-89 → Control unit error (general) → Non-specific error in the airbag system, requires precise diagnosis by specialist personnel.
- 00588 → Driver side airbag squib (N95) resistance too high or too low → Problem with the squib circuit, may indicate control unit failure.
- 01217 → Side airbag igniter driver side (N199) Error → Malfunction of the side airbag ignition circuit, often caused by control unit or wiring problems.
For a precise diagnosis and resetting the error memory after an Audi A5 8T airbag control unit repair, we recommend using official VAG diagnostic systems such as VCDS or ODIS.
What part numbers are available for the Audi A5 8T airbag control unit repair?
For Audi A5 8T airbag control unit repairs, specific, verified OEM part numbers are crucial to ensure compatibility with your vehicle. These numbers are predominantly from Bosch and guarantee that you will receive a compatible original replacement part that restores full system functionality.
The most important OEM part numbers for the Audi A5 Type 8T (model years approx. 2007–2016) are precisely verified with the original manufacturer parts by Bosch and have been checked multiple times via independent sources.
It is imperative that the new or repaired part number matches 100% with the originally installed control unit to ensure compatibility and the highest safety standards.
Even though Bosch is the primary manufacturer, similar control units can also be assigned to the Audi A5 via other suppliers such as Continental or Autoliv.
The most important part numbers for the Audi A5 8T airbag control unit are:
- 8K0 959 655 B
- 8K0 959 655 J
- 8K0 959 655 K
- 8K0 959 655 N
- 8K0 959 655 P
A professional workshop should always be consulted to ensure correct diagnosis, part number selection, and installation of the airbag control unit.