What is a Volkswagen Arteon 3H airbag control unit?
The Volkswagen Arteon 3H airbag control unit is your vehicle's central safety unit, precisely activating all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors crash sensors, stores relevant accident data, and ensures the proper functioning of all modules to provide maximum safety.
This control center processes signals from crash sensors integrated into or distributed throughout the vehicle. It measures acceleration and impact forces to react quickly and reliably when necessary.
After a collision, the module sends firing pulses to the airbag modules with gas generators. It also takes seat occupancy into account to activate the passenger airbag as needed.
Why is the Volkswagen Arteon 3H airbag control unit defective?
The Volkswagen Arteon 3H airbag control unit can fail for a variety of reasons: Often, this is the result of an accident, in which crash data is permanently stored in the memory, necessitating a professional Volkswagen Arteon 3H airbag control unit repair. Internal malfunctions or communication problems on the vehicle bus can also lead to failure, impairing the safety systems.
Because crash data is stored in the control unit's memory after an accident, it is marked as "triggered." This prevents further use until this data is professionally erased and the device is reset.
A failure can also be caused by aging internal components or water damage. In such cases, a diagnostic visit to the workshop is essential to determine the exact cause and find a suitable solution for the Volkswagen Arteon 3H airbag control unit repair.
Common error codes for Volkswagen Arteon 3H airbag control unit repair
A faulty Volkswagen Arteon 3H airbag control unit will display specific error codes that indicate communication issues or internal module defects. These codes, such as B1000 or B3168, require precise diagnostics to identify the cause of the failure and initiate the necessary Volkswagen Arteon 3H airbag control unit repair or replacement.
- B1000 → Control unit communication error → General disruption of data transmission between modules.
- B3167 → Control unit faulty → Internal error, replacement of the module recommended.
- B3168 → Control unit defective → Critical internal defect, replacement required.
- U1123 → Databus reception error → The control unit receives faulty CAN bus messages.
What part numbers are available for the Volkswagen Arteon 3H airbag control unit repair?
For the Volkswagen Arteon 3H airbag control unit repair, several verified OEM part numbers are relevant, representing the original parts of the Volkswagen Arteon 3H. These include Volkswagen-specific numbers such as 3H0 959 655 B/C/D/E and the Bosch supplier number 5Q0 907 379 N, which allow precise identification of the required module.
The serial number "3H0 959 655 x" is the typical OEM series for airbag control units specifically designed for the Arteon 3H. These have been confirmed in several independent catalogs, including original VW catalogs.
The Bosch part number 5Q0 907 379 N identifies a genuine part from Bosch, a well-known manufacturer of airbag control units for Volkswagen. All part numbers mentioned are clearly identified as airbag control units, not sensors.
The Volkswagen Arteon 3H airbag control unit repair option for these part numbers offers a cost-effective alternative to purchasing a new one. After resetting, the control unit can often be reinstalled plug-and-play, eliminating the need to visit a workshop for a costly replacement.