What is an Opel Combo A airbag control unit?
The Opel Combo A airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper and safe operation of all airbag modules and seatbelt pretensioners in the vehicle.
This electronic control unit, also called ECU, is crucial for the passive safety of the vehicle.
It evaluates signals from crash and acceleration sensors in order to trigger airbags in the event of an impact.
Why is the Opel Combo A airbag control unit defective?
An Opel Combo A airbag control unit often fails because it develops internal electronic errors that cause permanent error messages, or because irreversible crash data is stored after an accident, preventing continued operation. These defects can require a comprehensive Opel Combo A airbag control unit repair.
Common causes are age-related corrosion of the electronics or overvoltage damage.
In particular, errors such as B1065, which indicates irretrievable crash data, make repair or replacement unavoidable.
Internal communication errors or problems with the chassis number can also lead to a failure.
Common error codes for Opel Combo A airbag control unit repair
When diagnosing a faulty Opel Combo A airbag control unit, specific B codes may appear that indicate internal problems with the unit and facilitate precise Opel Combo A airbag control unit repair. These codes typically signal communication problems, internal errors, or stored crash data.
- B1000 → Control unit communication error → Internal defect or wiring problem.
- B055 → Control unit error / Internal error → Defect in the ECU hardware or software.
- B0555 → Control unit not reachable → Loss of communication with the diagnostic device or vehicle network.
- B057 → Error in the control unit coding → Incorrect or missing vehicle-specific configuration.
- B1065 → Crash data stored, memory cannot be erased → Impact data that cannot be erased after an accident, requires repair/reset.
- B1080 → Missing or incorrect chassis number in the control unit → Incorrect programming or data corruption.
What part numbers are available for the Opel Combo A airbag control unit repair?
For the Opel Combo A airbag control unit repair, two main part numbers are verified as original OEM numbers: the Opel-specific 95523058 and the Autoliv number 24459849 1610662. These numbers are crucial for identifying the correct replacement part and a successful repair.
The part number **95523058** is an original Opel/GPA OEM article number that is explicitly listed for the airbag control unit of the Opel Combo.
The number **24459849 1610662** is listed in spare parts catalogs for an Opel Combo 1.3 CDTI 16V airbag control unit and presumably originates from the supplier Autoliv.
Other OEM numbers from manufacturers such as Bosch, Continental or Siemens could not be verified for this specific Opel Combo A airbag control unit.
Technical details and compatibility of the Opel Combo A airbag control unit
The Opel Combo A airbag control unit continuously monitors signals from crash, acceleration, and seat occupancy sensors to deploy the appropriate airbags within milliseconds in the event of an accident, thus providing the best possible protection for occupants. It is designed specifically for the Opel Combo A.
The control unit differentiates between the type and severity of an impact in order to activate only the restraint systems that are actually necessary.
It stores crash data that must be read out and deleted after an accident, provided there are no further errors.
The control unit is compatible with the Opel Combo A, including variants such as the delivery van and the Combo Tour, typically for model years from the early 2000s to around 2011.
It is also compatible with engine codes such as Z13DTJ (1.3 CDTI 16V Diesel).
Installation position and important information for Opel Combo A airbag control unit repair
The Opel Combo A airbag control unit is usually mounted centrally in the center console or under the driver's seat to ensure optimal signal paths and requires the vehicle battery to be disconnected during installation or removal to enable a safe Opel Combo A airbag control unit repair.
The device has several connectors, including special yellow-marked airbag connectors that ensure safe and correct signal transmission.
The integrated short-circuit mechanisms in the plug connections prevent unwanted triggering due to static discharge during handling.
After an Opel Combo A airbag control unit repair or replacement, vehicle-specific settings do not need to be reprogrammed; only the error memory needs to be erased.