What is a Mitsubishi Grandis NA airbag control unit?
The Mitsubishi Grandis NA airbag control unit is the central safety unit in the vehicle, responsible for monitoring and activating all occupant restraint systems such as airbags and seatbelt pretensioners. It processes sensor data, stores important crash information, and ensures maximum safety for the driver and passengers through continuous self-diagnosis.
This electronic module is compatible with the 12-volt electrical system of the Mitsubishi Grandis NA (model code NA0W, built between 2004 and 2009). It is essential for reliably controlling airbag deployment in the event of an accident.
The control unit communicates via the vehicle diagnostic interface (OBD) and enables the reading of error codes and the resetting of the system after an accident or repair. It manages the synchronization of the airbag and seatbelt pretensioner systems and is typically located under the driver's seat or in the center console.
Why is the Mitsubishi Grandis NA airbag control unit defective?
A Mitsubishi Grandis NA airbag control unit often fails because it stores accident data after a collision, requiring a reset, or because it is internally damaged. General aging, corrosion caused by moisture, or electrical short circuits can also lead to failure, impairing the function of the entire airbag safety system.
Common causes of a defect include the storage of crash data after an accident, which necessitates reprogramming or replacement. Internal component defects or software problems can also impair the function of the control unit.
Error messages like a permanently lit airbag light on the dashboard are clear indicators of a problem. Poor electrical connections or power supply issues can also cause the airbag control unit to stop working, necessitating a Mitsubishi Grandis NA airbag control unit repair.
Common error codes for Mitsubishi Grandis NA airbag control unit repair
When repairing a Mitsubishi Grandis NA airbag control unit, specific error codes are crucial for identifying the exact cause of a problem. These codes directly indicate malfunctions within the control unit itself and enable targeted diagnostics to avoid costly replacements.
- **B1000**: Control unit communication error → General malfunction in the airbag ECU, indicates an internal defect.
- **B1207**: Passenger Airbag Indicator Circuit Short → Short circuit in the passenger airbag indicator light circuit line, may indicate defective indicator or poor connection.
- **B1208**: LCD Heater Error → Error in the LCD heater of the airbag module, specific to the airbag ECU.
- **B1209**: Test mode → Control unit is in test mode, may indicate a misconfiguration or internal condition.
- **B1300**: Topstack Switch → Circuit failure of the topstack switch in the airbag control unit.
- **B1402**: Driver Airbag Squib Ground Fault → Ground fault on the driver airbag deployment circuit, often caused by problems with the clockspring connection or connector.
These codes are specific to the Mitsubishi airbag system and help repair shops perform a precise diagnosis. They isolate problems to the airbag control unit itself and rule out sensor or seatbelt pretensioner faults.
A **defective** or **broken** control unit can be quickly identified by reading these error codes, paving the way for efficient **repair** or replacement. This allows the **failure** of the safety system to be rectified and full functionality restored.
What part numbers are available for the Mitsubishi Grandis NA airbag control unit repair?
For Mitsubishi Grandis NA airbag control unit repairs, accurate part numbers are essential to ensure part compatibility. Three main numbers are relevant for the NA0W model: a genuine Mitsubishi number and two alternative OEM supplier numbers, all of which are directly compatible and ensure full functionality.
The primary original Mitsubishi OEM part number is **MN141401**. This number is consistently identified as the correct designation for the Grandis NA0W airbag control unit and is listed in manufacturer catalogs.
Two other supplier numbers often listed as OEM alternatives are **W2T62674** and **2489104**. W2T62674 is often assigned to Bosch or another supplier, while 2489104 can also be a common supplier number from Bosch or Continental.
These part numbers are independently verified for the airbag control module of the Mitsubishi Grandis NA0W from 2004 to 2009. They must match exactly for a successful repair or replacement of the module.