What is a Volvo 940 Series 1 airbag control unit?
The Volvo 940 Series 1 airbag control unit is your vehicle's central safety unit, activating all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules in the vehicle for your safety.
This electronic control unit, often called the SRS module, is crucial for occupant protection. It receives signals from impact sensors and deploys the airbags in milliseconds when necessary.
A functioning control unit is essential to ensure the full performance of the safety system in the Volvo 940 Series 1. A professional Volvo 940 Series 1 airbag control unit repair is highly recommended in the event of defects.
Why is the Volvo 940 Series 1 airbag control unit defective?
The Volvo 940 Series 1 airbag control unit can fail due to aging, electrical surges, or internal component failures, preventing the airbags from deploying in an accident. Because it contains a backup battery and complex circuitry, internal malfunctions often lead to failure, requiring a Volvo 940 Series 1 airbag control unit repair.
Common causes include faults in the internal emergency power supply or corrosion at the connectors. Such a failure is usually signaled by the illuminated SRS warning light in the dashboard.
Storing crash data after an accident can also block the control unit, causing it to no longer function. In such cases, professional diagnosis and repair of the unit is necessary.
Common error codes for Volvo 940 Series 1 airbag control unit repair
When repairing the Volvo 940 Series 1 airbag control unit, certain OBD-I flashing codes directly indicate problems with the control unit. Code 2 signals a backup battery failure, Code 3 concerns the diagnostic line or warning light, while Code 8 indicates a short to positive. These errors require a targeted diagnosis and repair of the module.
The codes are read using a special ground contact procedure, during which the SRS light displays the codes as a series of flashes. A precise knowledge of these codes is crucial for a precise Volvo 940 Series 1 airbag control unit repair.
Only the specific control unit error codes allow for efficient troubleshooting without focusing on sensor or airbag module errors. Here are the relevant codes:
- **Code 2:** Fault in the emergency battery / standby power unit → Internal power supply of the control unit is faulty.
- **Code 3:** Diagnostic line or warning light - short circuit → ECU or warning light communication error.
- **Code 8:** Short circuit to positive in airbag or supply line → Electrical problem affecting the control unit supply.
What part numbers are available for the Volvo 940 Series 1 airbag control unit repair?
For a reliable Volvo 940 Series 1 airbag control unit repair, exact original OEM part numbers are crucial. The primary Volvo OEM number is 9162615, which is confirmed by the Bosch supplier number 0285001148. Only these numbers ensure correct compatibility and function for your Volvo 940 Series 1 airbag control unit.
It's important to use only these verified numbers, as other part numbers often refer to later models or different components. This prevents malfunctions after repair.
Using the correct part number ensures that the repaired or replaced control unit works optimally with your vehicle's existing airbag system.
- **Volvo (OEM):** 9162615
- **Bosch (OEM supplier no.):** 0285001148