What is a Volvo 360 Series 1 airbag control unit?
The Volvo 360 Series 1 airbag control unit is your vehicle's central safety unit, precisely activating all passive occupant protection systems in the event of a collision. It monitors crash sensors, stores relevant system data, and ensures the reliable operation of the airbags. A functioning unit is essential for your safety.
This essential component is responsible for evaluating the acceleration values from crash sensors. Based on this data, it decides whether airbags and seatbelt pretensioners should be deployed.
It's a complex electronic system that must be highly reliable against short circuits and voltage faults. Regular self-tests ensure the system's continuous operational readiness.
Why is the Volvo 360 Series 1 airbag control unit defective?
A Volvo 360 Series 1 airbag control unit often fails due to electronic components failing due to age or corrosion caused by moisture. A previous accident can also block the control unit from triggering or cause internal damage. Proper function is then no longer guaranteed.
Common causes of failure are internal electronic defects that develop over the vehicle's lifetime. These can be caused by component aging or overheating.
Water ingress or moisture in the interior can also cause short circuits or corrosion on the control unit's sensitive circuit boards. This often results in error messages or a complete loss of functionality, making a Volvo 360 Series 1 airbag control unit repair unavoidable.
After an accident in which airbags are deployed, the control unit stores crash data. This makes further use impossible without a professional reset or repair, as safety can no longer be guaranteed.
Common error codes for Volvo 360 Series 1 airbag control unit repair
There are no officially confirmed, specific error codes for the Volvo 360 Series 1 airbag control unit. However, general Volvo SRS codes indicate problems that are relevant to airbag control unit repair and can facilitate diagnosis.
- `SRS-00D0`: Incorrect configuration → Possible cause is a communication problem or incorrect programming.
- `SRS-00D5`: Communication error → Signal interruption between control unit and other system components.
- `SRS-0115`: Driver side airbag inflator circuit open or short circuit → Defect in the airbag module or wiring harness.
- `SRS-0151`: Steering column module control unit error → Internal defect in the steering column module or its connection to the SRS.
- `SRS-01D0`: Pyrotechnic battery isolator triggered → Disconnects the battery in case of an accident, must be replaced after triggering.
What part numbers are available for the Volvo 360 Series 1 airbag control unit repair?
A 100% verified, exact OEM part number for the Volvo 360 Series 1 airbag control unit is not clearly documented in available sources. This makes identification for a precise airbag control unit repair on this older model particularly challenging and requires individual testing.
Accurately identifying the part number for your Volvo 360 Series 1 airbag control unit is crucial to ensure compatibility. Unfortunately, specific OEM numbers for this older model are difficult to find.
References from similar Volvo models, such as the Volvo 850 station wagon, mention Volvo part number 9148799 and Bosch part number 0285 001 048. However, these are not confirmed for the 360 Series 1 and serve only as examples for possible part identification.
For a reliable airbag control unit repair and to find a suitable replacement, it is essential to read the number directly from the installed control unit. Alternatively, official Volvo parts catalogs containing your vehicle identification number (VIN) can provide information.
Without the exact part number, there is a high risk of incompatibility, which could compromise the safety of the occupant protection system. Professional diagnosis and repair at a specialized workshop is strongly recommended.