What is a Toyota Verso AR20 airbag control unit?
The Toyota Verso AR20 airbag control unit is your vehicle's central safety unit, activating all occupant restraint systems within milliseconds in the event of an accident. It continuously monitors sensors, stores important crash data, and ensures the proper functioning of all airbag modules and seatbelt pretensioners in the vehicle.
This control unit (ECU) is designed for models from 2009 onwards, particularly for diesel variants with a 2.2-liter displacement. Its main function is to control and monitor the entire passive safety system.
It receives real-time data from various sensors, such as crash sensors and seat occupancy sensors. Based on this information, it decides whether to correctly deploy the airbags and seat belts.
Why is the Toyota Verso AR20 airbag control unit defective?
The Toyota Verso AR20 airbag control unit can be defective due to internal electronic errors or communication problems. A failure often results in a permanently illuminated airbag warning light and impairs the functionality of the safety system. Immediate Toyota Verso AR20 airbag control unit repair is urgently required.
Common causes include internal ECU errors, which can lead to a B1000 control unit communication error. Damage to the wiring or connectors can also impair functionality.
Another possible cause of the failure could be a problem with the driver airbag ignition module, signaled by code B1811. This could indicate a faulty clock spring or corrosion in the steering wheel connectors, which may require repair.
Repairing the control unit is often a cost-effective alternative to a complete replacement. Specialized workshops can replace defective chips or electronic components to restore full functionality.
Common error codes for Toyota Verso AR20 airbag control unit repair
During Toyota Verso AR20 airbag control unit repair, specific error codes occur that signal direct problems with the airbag ECU and enable accurate diagnosis. These codes help identify the exact cause of a failure and initiate the necessary steps to correct the defect.
- B1000 → Control unit communication error → Cause: Internal ECU errors or line damage.
- B1811 → Driver airbag ignition module 2nd stage - circuit 2 → Cause: Defective clock spring, corrosion in connectors or internal control unit errors.
These error codes are read directly from the airbag ECU during diagnostics and indicate problems within the control unit. They differ from sensor or seatbelt pretensioner error codes.
After successfully resolving the cause and performing the Toyota Verso AR20 airbag control unit repair, the control unit must be reset using a diagnostic tool. This clears the error code and turns off the airbag warning light.
What part numbers are available for the Toyota Verso AR20 airbag control unit repair?
For the Toyota Verso AR20 airbag control unit repair, two verified OEM part numbers are primarily relevant, ensuring compatibility with your vehicle model from 2009 onwards. These guarantee that you will find the correct control unit for the repair to restore full functionality.
The most commonly used OEM part number for the airbag control unit specified by Toyota is 89170-0F100. This component is manufactured by TRW as a supplier.
A technically identical alternative is the TRW manufacturer number 220591-101. Both numbers are verified for the Toyota Verso AR20 from model year 2009 and apply exclusively to the control unit itself, not to sensors.
When searching for replacement parts or planning a Toyota Verso AR20 airbag control unit repair, be sure to use one of these two numbers. Other numbers refer to sensors or other airbag components and are irrelevant to the control unit.