What is a SsangYong Korando Turismo airbag control unit?
The SsangYong Korando Turismo airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors the vehicle's sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules and seatbelt pretensioners in the vehicle for optimal occupant protection.
This electronic control unit is the brain of your vehicle's passive safety system. It continuously analyzes data from acceleration sensors to respond precisely and quickly in an emergency.
Its proper functioning is crucial for airbags and seatbelt pretensioners to deploy reliably in the event of a collision, thus preventing serious injuries. A professional SsangYong Korando Turismo airbag control unit repair restores this safety function.
Why is the SsangYong Korando Turismo airbag control unit defective?
A SsangYong Korando Turismo airbag control unit is considered defective because it stores crash data after an accident, requiring reprogramming, or because internal components fail due to age. These errors can also be caused by low voltage or a faulty vehicle battery, which disrupts system communication.
The most common cause of the error message is a registered impact, even in minor accidents without airbag deployment. The stored crash data then blocks reactivation of the system, requiring a SsangYong Korando Turismo airbag control unit repair.
Some control units can also fail due to internal electronic errors or age-related wear and tear on the components. Such failures cause the airbag warning light to stay illuminated, requiring diagnostics.
Common error codes for SsangYong Korando Turismo airbag control unit repair
Typical error codes indicating a problem with the SsangYong Korando Turismo airbag control unit range from general communication errors to specific reports of stored crash data. These codes usually indicate a necessary SsangYong Korando Turismo airbag control unit repair to restore full functionality.
- B1000 → Control unit communication error → Internal fault or power supply problem.
- B1015 → Airbag control module error → Defect within the internal electronics of the control unit.
- B1139 → Error within the SRS module → General internal control unit error.
- B1193 → Airbag module-related error → Indicates a malfunction of the control unit itself.
- B1206 → Airbag RCM (Restraint Control Module) Error → Internal error of the restraint control unit.
- B1342 → SRS control unit error → General airbag system malfunction.
- B1620 → SRS system error → Wide functional error, often caused by a defective control unit.
- B1649 → Crash detected (Crash Data stored) → Accident event registered, requires reset or SsangYong Korando Turismo airbag control unit repair.
What part numbers are available for the SsangYong Korando Turismo airbag control unit repair?
Several verified OEM part numbers are relevant for the SsangYong Korando Turismo airbag control unit repair: the original SsangYong part number 86250-34580 and the Continental part numbers 86250-37283 and 86250-37032, which were used as original equipment parts. These numbers ensure correct compatibility and function.
Part number 86250-34580 is a direct, genuine SsangYong part number. Specialist suppliers list it as suitable for airbag control unit repairs on the Korando Turismo.
Continental, a renowned supplier, also produces compatible control units with the numbers 86250-37283 and 86250-37032. These spare parts are functionally identical and can be used in a SsangYong Korando Turismo airbag control unit repair.
Technical specifications for your SsangYong Korando Turismo airbag control unit
The SsangYong Korando Turismo airbag control unit typically operates at a voltage of 9-16 volts and can withstand temperatures from -40°C to +85°C. It features internal acceleration sensors, interfaces for external impact sensors, and separate circuits for all airbags and seatbelt pretensioners to maximize safety.
The control unit's electronics are designed to provide the necessary ignition voltage for the airbags, even during voltage fluctuations or brief power outages. An integrated DC/DC converter ensures this power supply.
For diagnostic and maintenance purposes, the module is equipped with a serial communication interface (KWP2000). This allows workshops to read error codes and provide a precise diagnosis in the event of a failure.
After an accident, the control unit stores comprehensive crash data. This black box function is important for accident analysis, but requires a reset or reprogramming after a crash before the vehicle is roadworthy again.
Compatible models and the role of SsangYong Korando Turismo airbag control unit repair
The airbag control units described here are primarily designed for the SsangYong Korando Turismo model years 2012 to 2019 and ensure the full functionality of the occupant safety systems. A professional SsangYong Korando Turismo airbag control unit repair is the cost-effective solution for these models.
Models from 2017 to 2019 in particular benefit from the ability to reset crash data. This allows plug-and-play use of the repaired control unit after a reset.
Technical compliance means that a repair not only restores safety but also represents significant cost savings compared to a new purchase. This avoids the unnecessary replacement of expensive components.
Functionality and features of the SsangYong Korando Turismo airbag control unit
The SsangYong Korando Turismo airbag control unit continuously monitors the vehicle's sensors, detects an impact, and activates the airbags and seatbelt pretensioners in a fraction of a second. At the same time, it performs self-diagnosis and records relevant accident data to ensure occupant safety at all times.
It is capable of distinguishing between different types of impact (front, side) and controlling the deployment of the corresponding safety components. The precision of this control is vital.
A key component of its functionality is continuous self-monitoring. If an internal error or malfunction in the connected sensors occurs, the control unit activates the airbag warning light in the dashboard.
The stored crash data is not only used for accident reconstruction, but is also the reason why a SsangYong Korando Turismo airbag control unit repair or reset is necessary after an impact.
Installation position and connections: Important for the SsangYong Korando Turismo airbag control unit repair
The SsangYong Korando Turismo airbag control unit is typically mounted inside the vehicle, often under the driver's seat or in the center console. This location ensures optimal connectivity with the crash sensors and airbag modules, which is crucial for a successful SsangYong Korando Turismo airbag control unit repair.
The central installation position allows for short cable routes to all critical components of the airbag system. These include connections for front and side impact sensors, as well as for the airbags and seat belt pretensioners.
The control unit also has a diagnostic interface, which is necessary for reading error codes and programming. This is an important step in troubleshooting and repairing the failure.
Special features and variants of the SsangYong Korando Turismo airbag control unit repair
A key feature of the SsangYong Korando Turismo airbag control unit is the ability to professionally reset or reprogram the stored crash data after an accident. This SsangYong Korando Turismo airbag control unit repair offers a cost-effective and environmentally friendly alternative to replacing the entire module.
Although there may be variations for different model years and trim levels, the basic functions and repairability of airbag control units are often very similar. This simplifies diagnostics and repair processes.
Working on the airbag control unit always requires trained personnel and the highest safety precautions, especially disconnecting the vehicle battery. This prevents accidental airbag deployment and protects against injuries.