What is a Porsche Macan 95B.2 airbag control unit?
The Porsche Macan 95B.2 airbag control unit is the central safety unit in the vehicle, responsible for activating and controlling all occupant restraint systems. It continuously receives signals from crash sensors, analyzes them at lightning speed, and precisely deploys the airbags and belt pretensioners when necessary to maximize occupant safety.
This electronic control unit, also known as the SRS airbag computer, coordinates the entire deployment process in the event of an accident. It is an integral part of the passive safety system and ensures its proper functioning.
The module is networked with other vehicle control units via the CAN bus to exchange important diagnostic data and vehicle status. It continuously monitors all connected airbag modules and sensors.
Why is the Porsche Macan 95B.2 airbag control unit defective?
A Porsche Macan 95B.2 airbag control unit often fails because it stores crash data after an accident, or internal components become damaged due to aging or electrical faults. This leads to error messages or safety system failure, which is why a repair of the Porsche Macan 95B.2 airbag control unit is necessary to restore full functionality.
After a collision, the system stores crash data, which blocks reuse and thus signals it as "broken." Even without an accident, electronic errors or software problems can cause a failure.
Signs of a defective module include a permanently lit airbag warning light in the dashboard or specific error codes that can be read during diagnosis by a specialized workshop.
Common error codes for Porsche Macan 95B.2 airbag control unit repair
When repairing a Porsche Macan 95B.2 airbag control unit, specific error codes may occur that directly relate to the control unit's function, not to the sensors or airbags themselves. These codes are crucial for an accurate diagnosis, as they signal a communication failure or internal ignition circuit problems within the module.
- B1000 → Control Unit Communication Error → Signals that the airbag control unit cannot establish a proper connection to other systems or sensors, a typical ECU error.
- B10011B → Driver Airbag Stage 2 limit value exceeded (ignition circuit) → Indicates that the measured value for the driver airbag ignition circuit within the control unit has been exceeded, which may indicate internal wiring errors or component aging.
What part numbers are available for the Porsche Macan 95B.2 airbag control unit repair?
Three OEM part numbers are verified for the Porsche Macan 95B.2 airbag control unit repair: 95B959655D, 95B959655F, and 95B959655G. These numbers identify original parts from the same control unit series that are suitable for the Porsche Macan 95B.2 and will restore their full functionality after a professional reset.
95B959655D: This Porsche OEM part number is often listed as a standard variant and is also known by the Bosch reference number 0285012734. It is relevant for various model years of the Macan 95B.2.
95B959655F: Another original Porsche OEM part number belonging to the same airbag control unit family. It was used in various production cycles of the Macan 95B.2.
95B959655G: This is the most recent of the tested Porsche OEM part numbers and is often installed in newer Macan 95B.2 models, for example, from model year 2021. All three numbers are relevant for repairing the Porsche Macan 95B.2 airbag control unit.