What is a Pontiac Wave Sedan airbag control module?
The Pontiac Wave Sedan airbag control unit is the central safety unit that precisely controls occupant restraint systems such as airbags and seatbelt pretensioners in the event of an accident. It continuously monitors sensor data, stores important crash information, and ensures the correct function of all airbag components in the vehicle for maximum safety.
It is an SRS (Supplemental Restraint System) or SDM (Sensing Diagnostic Module) that processes all relevant information.
The module is an essential component of the passive safety system and must always function properly.
Why is the Pontiac Wave Sedan airbag control module defective?
A Pontiac Wave Sedan airbag control unit often fails after an accident because it permanently stores crash data that requires deactivation. Internal electronic failures due to aging or voltage spikes can also lead to malfunctions, necessitating immediate repair or replacement.
After a crash, the control unit stores indelible "hard codes" that activate a warning light and block the system.
Internal component failures, such as defective EEPROM memory or microcontrollers, can also lead to failure and impair functionality.
Inadequate power supply or corrosion at the connectors can cause communication errors that disable the airbag system.
Common error codes for Pontiac Wave Sedan airbag control unit repair
Typical Pontiac Wave Sedan airbag control module error codes indicate internal module issues or communication problems that require a thorough diagnosis. These specific codes help identify the cause of the airbag warning light and initiate the necessary repair.
- B1000 → Control unit communication error → The airbag ECU cannot communicate correctly with other systems.
- B1001 → Control unit internal memory error → Internal memory of the airbag control unit is damaged or faulty.
- B1002 → EEPROM memory defective → The permanent data memory (EEPROM) in the airbag ECU has errors.
- B1003 → Microcontroller reset error → The main processor of the control unit does not start correctly or resets unexpectedly.
- B1200 → Power supply to airbag control unit too low → The supply voltage of the airbag control unit is below the target value.
- B1210 → Internal self-test error → The airbag ECU detected a defect during its self-test.
- B1234 → Communication error with airbag hardware → The control unit cannot communicate correctly with the connected airbag components.
- B1410 → Airbag control unit memory error → A general error in the memory area of the airbag control unit was detected.
- 12 → Low battery voltage → The on-board voltage is too low, which can impair the function of the control unit.
- 13 → Airbag circuit shorted to ground → An airbag circuit has a short circuit to vehicle ground, detected by the control unit.
- 14 → Primary crash sensor circuit shorted to ground → The primary crash sensor circuit is shorted, detected by the control unit.
- 21 → Safing sensor not mounted correctly → The safety sensor (integrated in the control unit) is incorrectly aligned or loose.
What part numbers are available for Pontiac Wave Sedan airbag control unit repair?
Determining the exact OEM part numbers for the Pontiac Wave Sedan airbag control module is complex, as no exact, verifiable numbers exist in public databases. However, precise part identification is critical for a successful Pontiac Wave Sedan airbag control module repair and ensuring system compatibility.
The Pontiac Wave is often used as a regional name for the Chevrolet Aveo, which is why part numbers may be found under Aveo designations.
Professional databases such as TecDoc/TecAlliance or a direct inquiry to the vehicle manufacturer (GM) are essential for reliable identification.
Without at least two to three independent sources, 100% verified OEM part numbers for the Pontiac Wave Sedan airbag control module cannot be issued.
How the Pontiac Wave Sedan Airbag Control Unit Repair Works
Pontiac Wave Sedan airbag control unit repair typically includes a detailed diagnosis to identify the cause of the failure, followed by reading and erasing the stored crash data and correcting any electronic defects. Specialized services restore the module to full functionality, often more cost-effective than purchasing a new one.
After an accident, a "reset" of the control unit is required to remove the crash data and the triggered warning light.
In case of internal electronic defects, the affected components in the module are professionally replaced and the software is checked.
A successful repair ensures that the airbag warning light goes out and the system is fully operational again.
Pontiac Wave Sedan Airbag Control Unit Location for Repair
The Pontiac Wave Sedan airbag control unit is typically located centrally in the vehicle, usually below the center console or in the passenger-side footwell. This location is critical for accurate impact detection and must be accessible for proper Pontiac Wave Sedan airbag control unit repair.
It is firmly screwed in place and connected to the vehicle electrical system, the sensors and the airbag modules via several connectors.
For removal, trim parts of the center console or footwell often have to be removed to allow safe access.
The connections include power supply, ground, sensor lines and data bus interfaces for communication.