What is a Pontiac G5 2007-2010 airbag control module?
The Pontiac G5 2007-2010 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle.
It receives signals from crash and impact sensors and manages the precise deployment of airbags and seatbelt pretensioners. This system ensures maximum occupant protection in collisions and is essential for vehicle safety.
In addition, the control unit continuously monitors all components of the airbag system for malfunctions. Detected problems are stored as error codes and can be read out for diagnostic purposes.
Typically, the module is securely mounted inside the vehicle, often under the passenger seat or in the center tunnel. It is connected to the entire vehicle network via special multi-plug connectors and is well protected from external influences.
Why is the Pontiac G5 2007-2010 airbag control module defective?
The 2007-2010 Pontiac G5 airbag control unit often fails because it stores specific crash data after an accident and then locks up. Internal hardware defects, software errors, or electrical surges can also cause the module to fail. In these cases, a repair is often a more cost-effective alternative to purchasing a new one.
After an airbag is deployed, the control unit stores irretrievable crash data in its memory. This data locks the module, rendering it inoperable without a professional reset.
An airbag control unit can fail or break due to internal defects even without an accident. This often manifests itself as persistent error messages on the dashboard, even when no physical damage is visible.
Electrical problems such as short circuits, overvoltage, or corrosion on the connectors can also cause failure. Such damage impairs the module's communication with other systems and requires comprehensive diagnostics.
Common error codes for Pontiac G5 2007-2010 airbag control unit repair
Common error codes for the 2007-2010 Pontiac G5 airbag control module indicate problems with deployment, internal circuits, or passenger detection. These specific codes indicate a malfunction of the control module itself. Professional repair or module reset is often the only solution to resolve the problem.
- B0053 : This code indicates a "Deployment Commanded with Loop Fault in the Circuit." It indicates a problem in the airbag control module's deployment circuit, often after a crash.
- B0055 00 : Means "Side airbag deployment commanded," a clear indicator of stored crash information. This requires a reset of the control unit to make it operational again.
- B0056 00 : Signals that the passenger frontal airbag is suppressed, even though it should be active. This may indicate a malfunction in the passenger detection system or the control unit.
- B0073 : The error code "Supplemental Deployment Circuit 1 - Resistance Too Low" indicates an electrical problem in the trigger circuit. A detailed diagnosis is necessary to determine the exact cause.
- B0074 : "Supplemental Deployment Circuit 1 - Open Circuit" indicates an open circuit in the deployment circuit. Both errors, B0073 and B0074, are typical internal control unit errors that require repair.
What part numbers are available for the Pontiac G5 2007-2010 airbag control unit repair?
For the Pontiac G5 2007-2010 airbag control module, specific OEM part numbers such as 20808619, 6234640, and 15246732 from General Motors and its suppliers are relevant. These original numbers are crucial for correctly identifying the module prior to repair. A thorough inspection ensures compatibility of this important component.
A common OEM part number for the Pontiac G5 airbag control module is 20808619. This original General Motors part number is specifically verified for the 2007 model year and is listed with used SDM modules.
The number 6234640 is another well-known OEM number from Delphi/GM for the SRS SDM. This module is often repaired by specialized repair services for the Pontiac G5 of these models.
Also relevant is the OEM number 15246732 , which is frequently found on Autoliv/GM SDM modules in this vehicle class. This number has been confirmed by comparisons with professional spare parts databases.
It's important to note that airbag control units are programmed very specifically for each vehicle. Checking the vehicle identification number (VIN) is always recommended to ensure exact compatibility for your 2007-2010 Pontiac G5 airbag control unit repair.
No verifiable replacement or alternative part numbers from other manufacturers without OEM reference are known for this module. Therefore, using the original numbers is essential for a successful repair.