What is a Pontiac Bonneville SSE airbag control module?
The Pontiac Bonneville SSE airbag control module is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle. Repairing this module is critical for safety.
Known as the Airbag Sensing Diagnostic Module (SDM), it precisely controls the deployment of front and side airbags, as well as seatbelt pretensioners. It's the "computer" of your vehicle's passive safety system.
The module records acceleration and impact direction signals from various collision sensors in the vehicle. Based on this data, it decides whether and when airbag deployment is necessary.
It also performs internal error detection and stores important diagnostic data regarding the functionality of the airbag system. An illuminated airbag warning light often indicates a malfunction of this device.
Why is the Pontiac Bonneville SSE airbag control module defective?
A Pontiac Bonneville SSE airbag control unit is often reported as defective after an accident because it stores one-time crash data that prevents restarting. It can also fail electronically, such as due to water damage or aging-related component failure, requiring immediate repair.
After the airbags are deployed in the event of an impact, the module permanently stores so-called "crash data." This blocks normal function and requires a professional reset or repair.
Electronic defects can occur even without an accident, for example due to overvoltage or corrosion. Symptoms often include a permanently illuminated airbag warning light or the display of specific error codes.
Repair or replacement is essential to restore the restraint system's full functionality. This is the only way to ensure the safety of the occupants in the event of a subsequent impact.
Common error codes for Pontiac Bonneville SSE airbag control unit repair
When repairing a Pontiac Bonneville SSE airbag control unit, specific B-codes are crucial because they indicate communication errors or problems with the control unit's internal circuitry. These codes help diagnose the exact cause of the malfunction and initiate a targeted repair.
- B1000: Control unit communication error – The cause is a malfunction in the internal data transmission of the airbag module.
- B0075: Supplemental Deployment Circuit - No. 1 Short to Ground or Voltage Out of Range – Indicates a short circuit or voltage anomaly in the trigger circuit.
- B0079: Seat Position Sensor (Driver Seat) - Short Circuit, Open Circuit, or Invalid Signal - Describes problems with the driver seat position sensor, which is important for the airbag control system.
- B0074: Passenger Occupancy Mat Signal Disconnected or Invalid - Indicates that the passenger seat occupancy mat signal is faulty, which may affect airbag operation.
What part numbers are available for Pontiac Bonneville SSE airbag control unit repair?
For Pontiac Bonneville SSE airbag control module repair, the primary OEM part numbers 25725745 and 12204250 from General Motors are relevant. These are 100% verified for 2001-2003 models and identify the correct Sensing Diagnostic Module (SDM) for your vehicle.
Part number 25725745 is the original General Motors (GM) OEM number for the airbag control module. It is confirmed for the 2001, 2002, and 2003 Pontiac Bonneville.
Additionally, the number 12204250 exists as an alternative or replacement OEM part number from GM for the same module. Both numbers refer specifically to the SRS SDM, the complete airbag control unit.
It's important to note that these GM numbers are the standard references, as suppliers like Bosch or Continental typically list their modules under GM's own numbers. Before repairing the Pontiac Bonneville SSE airbag control unit, the number on the unit should be checked.
Compatibility and installation position for the Pontiac Bonneville SSE airbag control unit repair
The compatibility of the airbag control unit for the Pontiac Bonneville SSE airbag control unit repair primarily extends to models built between 1997 and 2003, especially SSE and SE versions. The module is usually securely mounted in the vehicle floor, protected from direct impact.
To ensure exact compatibility, please compare the existing part numbers of the original device. Slight variations may occur for models outside the core 2001-2003 range.
The airbag control unit is typically located under the passenger seat or in the center console. This position minimizes the risk of damage in the event of an impact.
It connects to the vehicle's network, including the CAN bus, via a dedicated connector. Its modular design facilitates disassembly for efficient repair or replacement of the device.
Service and diagnostics for your Pontiac Bonneville SSE airbag control unit
Professional services for your Pontiac Bonneville SSE airbag control unit include quick resets after an accident or repairs for electronic defects. Professional diagnostics using GM-compatible tools are crucial for identifying the exact cause of the problem and ensuring safety.
After an accident, the module often needs to be reset or repaired to restore full functionality. Many providers offer a quick reset service that makes your module plug-and-play again.
Recoding to the vehicle identification number (VIN) is required for used modules, which specialized service providers or authorized workshops can perform. This ensures correct coordination with your specific vehicle.
For more in-depth diagnostics, a GM-compatible airbag diagnostic tool, such as the GM Tech2, is recommended. This helps identify even rarer error codes, which are crucial for a successful Pontiac Bonneville SSE airbag control unit repair.