What is a Peugeot 7008 I airbag control unit?
The Peugeot 7008 I airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors signals from crash sensors, stores relevant crash data, and ensures the precise and timely deployment of the airbags and seatbelt pretensioners to provide the best possible protection for occupants.
This electronic control unit (ECU) is essential for the vehicle's passive safety. It evaluates sensor data at lightning speed and makes the decision to fire the safety components.
The programming of the control unit is vehicle-specific and includes the chassis number (VIN) as well as the exact configuration of the ignition channels.
Why is the Peugeot 7008 I airbag control unit defective?
A Peugeot 7008 I airbag control unit typically fails due to crash data being stored after an accident, internal hardware failures, or power supply issues, which require immediate Peugeot 7008 I airbag control unit repair. Software errors or the inability to delete crash data can also cause a failure.
After an airbag is deployed, the control unit stores indelible crash data, which blocks further use.
Internal electronic components can fail due to aging, overvoltage, or mechanical influences. Communication errors or defective memory chips are also common causes of failure.
Common error codes for Peugeot 7008 I airbag control unit repair
There are no publicly verified error codes for the Peugeot 7008 I airbag control unit, but generic B-codes are typical for control unit problems relevant to a Peugeot 7008 I airbag control unit repair. These codes indicate internal errors, communication problems, or hardware defects.
- B1000 → Control unit communication error → Causes: Cable break, connection error, control unit defect
- B1001 → Internal memory error control unit → Causes: Defective memory chips, data corruption
- B1010 → Error in power supply control unit → Causes: voltage fluctuations, fuse defects
- B1020 → Error in the airbag control unit software → Causes: software corruption, faulty update
- B1030 → EEPROM error → Causes: Damaged non-volatile memory
- B1040 → Internal self-test failed → Causes: Hardware error in the control unit
- B1050 → UDS protocol communication error → Causes: Communication failure with diagnostic devices
- B1080 → Memory overflow in the control unit → Causes: Excessive data storage
- B1100 → Internal diagnostic error → Causes: General hardware or software problems
- B1200 → Error deleting crash data → Causes: Crash data blocked, control unit defective
- B1210 → Control unit defective (hardware error) → Causes: Irreparable damage to the control unit
What part numbers are available for the Peugeot 7008 I airbag control unit repair?
There are currently no directly verified OEM part numbers for the Peugeot 7008 I airbag control unit available from the available search results, as the numbers found are associated with other Peugeot models. However, a precise Peugeot 7008 I airbag control unit repair requires the exact OEM part number, which is vehicle-specific.
The exact OEM number is usually stored on the control unit itself or in the official Peugeot spare parts catalog (e.g. TecDoc).
To determine the correct part number, you should check the vehicle identification number (VIN) and consult a Peugeot service center or specialized parts catalog.
Part numbers for other Peugeot models, such as 6547WJ (Peugeot 206) or 821641 (Peugeot 306), are not suitable for the Peugeot 7008 I and cannot be used.