What is a Peugeot 106 I airbag control unit?
The Peugeot 106 I airbag control unit is the central safety unit that activates the occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors all relevant sensors in the vehicle, stores important crash data, and ensures the proper functioning of all passive safety systems for occupant protection.
This module is crucial for vehicle safety. It analyzes signals from acceleration sensors and crash sensors.
In the event of a collision, the control unit precisely deploys the airbags and seatbelt pretensioners. It also communicates with the vehicle's diagnostic system and stores error codes.
Why is the Peugeot 106 I airbag control unit defective?
A Peugeot 106 I airbag control unit is often defective due to internal memory errors, communication problems with other vehicle systems, or indelible crash data stored after an accident. This typically results in the airbag warning light remaining permanently illuminated and can disable the safety system's functionality, requiring immediate repair.
Common causes include aging-related defects in the electronics. Overvoltage or short circuits can also lead to failure.
After an accident, stored crash data blocks the system. This data must be professionally deleted so the device is operational again.
Sometimes it's software errors or a missing initialization. These require special diagnostic and repair tools.
Common error codes for Peugeot 106 I airbag control unit repair
During the Peugeot 106 I airbag control unit repair, specific error codes are read out, indicating internal defects or communication problems within the control unit, rather than sensors or seatbelt pretensioners. These codes are crucial for diagnosis and indicate whether the control unit needs to be repaired or replaced to restore the vehicle's safety functions.
- **B1000** → Control unit communication error → Often caused by a faulty control unit or damaged wiring harnesses.
- **B1001** → Internal memory error in the control unit → Often a hardware or software problem within the ECU.
- **B1002** → Error in the control unit software → Indicates a damaged or corrupt software version.
- **B1010** → Control unit circuit defective → Indicates problems in the internal power supply or circuitry of the ECU.
- **B1015** → Missing or incorrect initialization → Occurs when the control unit is not correctly programmed to the vehicle.
- **B1020** → EEPROM error / data error in the control unit → Indicates problems with the device's non-volatile memory.
- **B1030** → Watchdog error (control unit not responding) → A critical error in which the internal monitoring of the control unit fails.
- **B1050** → Internal self-test of the control unit failed → The control unit could not successfully test its own functions.
What part numbers are available for the Peugeot 106 I airbag control unit repair?
For a successful Peugeot 106 I airbag control unit repair, precise knowledge of the OEM part numbers is crucial, as these modules are vehicle-specific and only fully compatible with the matching number. Various original equipment manufacturers, such as PSA, Bosch, and Autoliv, supplied control units for the Peugeot 106, with each number guaranteeing an exact match for the model and year of manufacture.
- **9623738080** → Manufacturer: PSA → Type: Original → Compatible with Peugeot 106 and Citroën Saxo.
- **654779** → Manufacturer: PSA → Type: Original → Another original part number for the control unit.
- **550404200** → Manufacturer: PSA → Type: Original → Suitable for the first generation models of the Peugeot 106.
- **0261204625** → Manufacturer: Bosch → Type: Original → OEM number specifically for Peugeot 106 II (Series 2, 1996-2001).
- **9630551480** → Manufacturer: Autoliv → Type: Original → Suitable for Peugeot 106 Series 2 models and function tested.
- **550579000** → Manufacturer: Autoliv → Type: Original → An alternative part number from Autoliv for the Peugeot 106 Series 2.
Installation position and compatibility of the Peugeot 106 I airbag control unit
The Peugeot 106 I airbag control unit is a safety-relevant component, usually located under the passenger seat or in the center console, and requires professional installation. It is specifically designed for the first-generation Peugeot 106 and its sister model, the Citroën Saxo, ensuring high compatibility for repair or replacement.
The installation location under the passenger seat allows for central access. Alternatively, it can be placed in the center console.
Before removing or installing the airbag, the vehicle battery must be disconnected. This prevents accidental airbag deployment.
The control unit is connected to the airbag sensors and modules via specific connectors. Correct wiring is essential.
It is compatible with Peugeot 106 Series 1 models, typically built between 1991 and 2003. The technically similar Citroën Saxo also uses the same control units.
The control unit is often "married" to the specific vehicle. This means it must be programmed to the individual vehicle.
Peugeot 106 I airbag control unit repair process
Repairing a Peugeot 106 I airbag control unit requires specialized expertise and diagnostic equipment, as critical safety functions are affected. The process includes reading the error codes, professionally erasing crash data, and, if necessary, reprogramming or resetting the module to permanently deactivate the airbag warning light and restore safety.
First, a precise diagnosis is performed to determine the exact cause of the defect. Often, this is error code B1000.
If crash data is stored after an accident, it must be erased. This is done using special software and is essential for a successful repair.
In the case of internal errors such as memory corruption, the control unit is repaired. This often requires replacing components.
After the repair, a reset and reprogramming are performed. This ensures that the device communicates correctly with the vehicle again.
Such repairs should only be performed by a qualified workshop. Only specialists can guarantee the safety of the airbag system.