What is an Opel Omega A airbag control unit?
The Opel Omega A airbag control unit is the central control unit of the passive safety system. It continuously monitors all sensors and, in the event of a collision, makes lightning-fast decisions about airbag and seatbelt pretensioner deployment. It also stores crash data, which is essential for diagnosis and a successful Opel Omega A airbag control unit repair.
This electronic control unit is essential to provide the best possible protection for the occupants in the event of an accident.
The module processes sensor information from acceleration sensors and airbag deployment circuits to react within milliseconds.
Why is the Opel Omega A airbag control unit defective?
The Opel Omega A airbag control unit often malfunctions because it stores crash data after an accident and then permanently locks up. This is the most common reason. Other causes include internal electronic failures or communication problems with the sensors, which require an Opel Omega A airbag control unit repair.
Because an accident event stores the crash data in the control unit, its function is often blocked until this data is professionally deleted or the module is repaired.
Internal memory errors or communication problems with side airbag sensors (SAS) can also cause failure, resulting in deactivation of the airbag system.
Such defects are critical because they affect vehicle safety and cause the airbag warning light to stay on, requiring urgent repair.
Common error codes for Opel Omega A airbag control unit repair
When repairing the Opel Omega A airbag control unit, specific B-codes indicate control unit defects. Common B-codes are B1000 for communication errors, B1066 for stored crash data, and B0007 for general control unit errors. Internal errors such as B1234 or B1290 also signal that this critical component needs repair.
- B1000 → Control unit communication error → Indicates missing connection to other vehicle systems.
- B1066 → Crash data saved → Control unit blocked after accident.
- B0007 → Control unit error → Requires replacement or professional repair of the module.
- B1234 → Internal memory error → Defect detected in the control unit itself.
- B1290 → Control unit initialization error → Problems starting or integrating the module.
- B1320 → Control unit software or hardware error → Critical internal defect detected.
These error codes are crucial for an accurate diagnosis to identify the cause of the problem with the airbag control unit.
The codes mentioned focus exclusively on the ECU of the airbag system and not on other components such as sensors or seat belt pretensioners.
What part numbers are available for the Opel Omega A airbag control unit repair?
Specific OEM part numbers are relevant for Opel Omega A airbag control unit repairs. These include original GM/Opel parts such as 90540198 and 9094807. These are supplemented by Siemens numbers such as 90 562 544 BJ and 5WK4113A-68HC05B6. These are verified OEM supplier parts that fit the Opel Omega A precisely.
The following part numbers are verified for your Opel Omega A airbag control unit and are suitable for repair:
- 90540198 | GM / Opel | Original
- 9094807 | GM / Opel | Original
- 90 562 544 BJ | Siemens | OEM replacement
- 5WK4113A-68HC05B6 | Siemens | OEM replacement
These part numbers ensure full compatibility and functionality of the repaired airbag control unit in your Opel Omega A.
It is crucial that the correct part number for your specific vehicle model is checked during an Opel Omega A airbag control unit repair.
Incorrect numbers can lead to incompatibility, malfunctions of the airbag system and thus safety problems.