What is a Nissan Maxima A35 airbag control unit?
The Nissan Maxima A35 airbag control unit is the central safety unit of the Supplemental Restraint System (SRS), which activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of a crash. It continuously monitors sensors, stores relevant crash data, and ensures the proper operation of all airbag modules in the vehicle for maximum occupant safety.
This critical component acts as the brain of the airbag system, processing signals from impact sensors in the vehicle. Its primary function is to precisely and timely trigger the passive safety devices in the event of a collision.
The control unit communicates with other vehicle systems via the CAN bus and stores all safety-relevant information. Proper functioning is crucial for vehicle licensing and the safety of vehicle occupants.
Why is the Nissan Maxima A35 airbag control unit defective?
A Nissan Maxima A35 airbag control unit is often defective because it stores crash data after an accident, which activates the airbag light. Internal errors, power supply problems, or communication disruptions can also cause failure. A repair is then necessary to restore safety.
After each airbag deployment, so-called "crash data" is permanently stored in the control unit. This data prevents the module from being reused without a special reset or professional repair.
Other causes of failure include overvoltages, water ingress, or aging of electronic components. This leads to internal errors that make proper function impossible.
Another common problem is incorrect configuration after replacing the module. The airbag control unit must be programmed to the specific vehicle identification number (VIN), otherwise the airbag light will remain active.
Common error codes for Nissan Maxima A35 airbag control unit repair
When diagnosing the Nissan Maxima A35 airbag control module, specific error codes may appear that indicate problems with the module itself, stored crash data, or communication problems. These DTCs are crucial for troubleshooting and successfully repairing the system.
- B1000: Control unit communication error → Airbag ECU → Communication problem with the airbag control unit.
- B1015: Crash data stored in the airbag control unit → Airbag Control Module Crash Code → Reset necessary after accident.
- B1427-55: Airbag control module not configured to VIN → Must be programmed → Module was replaced but not adapted.
- B142A: Ignition voltage error → Airbag ECU power supply → Control unit power supply problem.
- B142X: Collision detection, crash data in the module → Reset required → Accident event stored in memory.
- B14XX: General airbag control unit error → Module defective, reset or replace → Internal defect in the control unit.
- U1000: CAN communication error → Bus connection error → Malfunction in the CAN bus to the airbag control unit.
- U1010: Airbag ECU CAN error → Check connectors → Specific control unit communication error.
What part numbers are available for the Nissan Maxima A35 airbag control unit repair?
The confirmed OEM part number for the Nissan Maxima A35 airbag control unit is 28556-53U00 from Nissan. When repairing or replacing the part, it is imperative that this number is exactly matched to the original part, as even the slightest deviation can significantly affect compatibility.
Part number 28556-53U00 is verified as a genuine airbag control unit for the Nissan Maxima A35. It serves as the primary reference for compatible replacement parts during repairs.
It is crucial that the module number to be repaired or replaced exactly matches that of the installed part. Differences in serial compatibility can significantly affect functionality.
To date, no other third-party OEM part numbers such as Bosch, Continental, or Autoliv have been found that are 100% verified for the Nissan Maxima A35 central airbag control unit. This underscores the importance of the original part number for a successful repair.