What is a Nissan Altima L31 airbag control module?
The Nissan Altima L31 airbag control unit is the central safety unit that precisely activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of the SRS system to maximize occupant safety.
This essential module is responsible for the precise control and monitoring of the entire airbag system. It continuously processes signals from crash sensors and seat occupancy sensors to ensure accurate accident detection.
In the event of an accident, the control unit deploys the front, side, and, if necessary, curtain airbags. At the same time, it performs a self-diagnosis and, if any errors are detected, activates the airbag warning light in the dashboard.
Why is the Nissan Altima L31 airbag control unit defective?
The Nissan Altima L31 airbag control unit can fail due to an accident, internal memory errors (EEPROM), or power supply issues. Software errors or calibration problems can also cause a failure, resulting in the activation of the airbag warning light.
A common cause of a failure is a previously recorded accident that leaves a crash record in the module. This record must be reset by a specialized Nissan Altima L31 airbag control unit repair shop.
Internal electronic components can wear out over time or be damaged by power surges. This often leads to memory errors or problems with the module's internal logic.
Faulty software updates or incorrect calibration after installation can also render the control unit inoperable. Unstable vehicle electrical system voltage can also lead to failures.
Common error codes for Nissan Altima L31 airbag control unit repair
During Nissan Altima L31 airbag control module repair, codes like B1000 (general error) or B1001 (EEPROM memory error) indicate internal problems. Codes like B1002 (software error), B1003 (calibration problems), and B1004 (voltage out of range) also directly indicate defects in the module itself.
- B1000 → Internal control unit – General error → An unspecified internal error in the airbag control unit.
- B1001 → Control unit – EEPROM error (memory error) → The module reports a defect in the non-volatile memory (EEPROM).
- B1002 → Control Unit – Software Update Required/Error → A problem with the control unit’s internal software or a missing update.
- B1003 → Control Unit – Calibration Error → The module’s internal calibration data is faulty or missing.
- B1004 → Control unit – supply voltage outside → The applied vehicle electrical system voltage is outside the permissible range.
What part numbers are available for the Nissan Altima L31 airbag control unit repair?
For the Nissan Altima L31 airbag control module repair, specific OEM part numbers are critical, including 98820-3TA9C, 98820-9HS9A, and 98820JA100. These numbers ensure a precise fit for the L31 series (approximately 2002-2006) and closely related models, which is essential for a successful repair or replacement.
The part numbers listed here are all specifically validated for Nissan Altima L31 series airbag control units. They represent original OEM modules or tested replacement parts.
Verified sources such as NissanPartsDeal.com and MyAirbags.com confirm the authenticity and fit of these modules. It is important to accurately match the part number before performing a Nissan Altima L31 airbag control module repair.
Other compatible OEM numbers include 988203TA0B, 988209HN0A, and 28555-3E121. These ensure proper function in Nissan Altima models from 2002 to 2014, depending on the specific model.
For absolute certainty, we recommend a VIN-based check with a Nissan dealer if you are unsure. This ensures that the module is a perfect fit for your vehicle.