What is a MINI Cooper Clubman R55 airbag control unit?
The MINI Cooper Clubman R55 airbag control unit is the central safety unit in your vehicle, instantly deploying the airbags and seatbelt pretensioners in the event of an accident to protect the occupants. It continuously monitors all restraint system sensors, stores important operating data, and must be professionally repaired after an accident or failure to restore full functionality.
This module ensures the correct functioning of the airbag system by evaluating sensor data and sending precise action commands when necessary.
An intact control unit is essential for the passive safety and roadworthiness of your MINI and should be checked immediately in the event of a **failure**.
Why is the MINI Cooper Clubman R55 airbag control unit defective?
The MINI Cooper Clubman R55 airbag control unit often fails because it stores crash data after an accident, causing the system to lock up and the airbag warning light to illuminate continuously. Internal hardware or software errors, voltage spikes, or age-related wear can also cause the control unit to fail, necessitating repair.
When the control unit registers an impact, it irrevocably stores the so-called crash data, which prevents the system from being used again without a reset.
A **failure** can also manifest itself through internal electronic problems that disrupt communication with other vehicle systems and lead to **errors**.
Common error codes for MINI Cooper Clubman R55 airbag control unit repair
When **repairing** the MINI Cooper Clubman R55 airbag control unit, specific **error codes** are often read out, which indicate internal defects rather than sensor or module issues. These codes signal that the control unit itself is malfunctioning, and therefore a targeted **diagnosis** and **repair** of the module is necessary to clear the airbag warning light.
- **37847:** Indicates an internal defect in the airbag control module, typically hardware or software problems, causing a persistent airbag warning light.
- **930C21:** Indicates a malfunction or data consistency error in the control unit, which may impair the operational reliability of the airbag system.
What part numbers are available for the MINI Cooper Clubman R55 airbag control unit repair?
For the **repair** of a MINI Cooper Clubman R55 airbag control unit, several verified OEM **part numbers** exist to ensure the module's compatibility with your vehicle. These numbers are crucial for identifying the exact control unit for replacement or **repair** and for avoiding future **errors** or incompatibilities.
- Part number: 65 77 9 348 933 – Manufacturer: BMW/MINI – Type: Original
- Part number: 65.77-3454346-01 – Manufacturer: BMW/MINI – Type: Original
- Part number: 9807169 – Manufacturer: BMW/MINI – Type: Original
- Part number: 65.77-9807168-01 – Manufacturer: BMW/MINI – Type: Original
- Part number: 3451779 – Manufacturer: BMW/MINI – Type: Original
- Part number: 610067400N – Manufacturer: BMW/MINI – Type: Original
Compatible models for the MINI Cooper Clubman R55 airbag control unit repair
The **repair** of the airbag control unit is primarily intended for the MINI Cooper Clubman R55, although the same module in a similar design can also be found in other MINI models of the R5x and R6x generations. However, a careful check of the **part numbers** and model years is essential to ensure exact compatibility for your specific vehicle model and the required **repair**.
It is compatible with the MINI Cooper Clubman R55 (N12, N16, W16 engine codes) from the production years 08/2007 – 07/2010 (N12/W16) and 03/2010 – 06/2014 (N16).
This control unit is also partially used in the R56 (Hatchback), R58 (Coupé), R60 (Countryman) and R61 (Paceman) series, but the specific **part numbers** and model years 2007-2016 should always be checked in advance.
Important information about MINI Cooper Clubman R55 airbag control unit repair
After successfully repairing a MINI Cooper Clubman R55 airbag control unit, proper reprogramming or coding using a professional diagnostic tool is essential. This ensures the module is correctly adjusted to the vehicle's parameters and can clear the airbag warning light, restoring full functionality to the airbag system and preventing future errors.
A repaired control unit is free of accident crash data and the error memory is erased, which is the prerequisite for safe recommissioning.
For safety reasons, work on the airbag system may only be carried out by qualified personnel in a specialized **workshop**.
Please note that repaired modules are usually classified as certified used parts with a limited warranty.