What is a Mercedes-Benz GLE C166 Coupé airbag control unit?
The Mercedes-Benz GLE C166 Coupé airbag control unit is the central safety unit in the vehicle, activating all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules and belt tensioners to provide maximum protection.
This specialized control unit, also known as the SRS control unit, is responsible for the precise and lightning-fast response in the event of a collision.
It acts as the brain of the passive safety system and processes real-time data from a variety of impact and acceleration sensors in the vehicle.
Why is the Mercedes-Benz GLE C166 Coupé airbag control unit defective?
A defect in the Mercedes-Benz GLE C166 Coupé airbag control unit often occurs due to internal component failures, voltage spikes in the vehicle electrical system, or corrupted data in the crash memory, which leads to the activation of the airbag warning light. Because the control unit itself is continuously monitored, it signals problems early on that could impair its functionality.
Typical causes of failures are internal memory defects or problems with the power supply within the module, which can be caused by aging or electrical interference.
The presence of crash data after an accident or incorrect reprogramming can also block the control unit and make it necessary to replace or repair it.
Common error codes for Mercedes-Benz GLE C166 Coupé airbag control unit repair
When repairing the Mercedes-Benz GLE C166 Coupé airbag control unit, specific error codes such as B1000 or B1010 are common. These indicate internal problems or communication errors within the control unit itself. These codes indicate a defect within the module itself and require specialized diagnostics and, if necessary, control unit repair to clear the airbag warning light.
- B1000 → Control unit communication error → The airbag control unit cannot communicate correctly with other internal components or the vehicle CAN bus.
- B1010 → Internal memory error in the airbag control unit → There is a defect or corruption in the internal data memory of the airbag control unit.
- B1060 → Internal power supply module error → The internal power supply of the control unit is faulty or unstable.
- B1100 → Airbag control unit initialization error → The control unit could not boot up or initialize properly after the ignition was switched on.
- B1120 → EEPROM data error in the airbag control unit → There are problems reading or writing the configuration data in the EEPROM memory of the control unit.
- B1140 → Airbag crash memory error (non-accident related) → The memory area for accident data is inconsistent or damaged without an accident having occurred.
- B1200 → Faulty internal sensor processing → The internal sensors of the control unit for impact detection are providing incorrect data or are themselves defective.
What part numbers are available for the Mercedes-Benz GLE C166 Coupé airbag control unit repair?
For the repair of the Mercedes-Benz GLE C166 Coupé airbag control unit, two precisely validated OEM part numbers are primarily relevant: A1669000220 and A1679009428, both from Mercedes-Benz. These numbers ensure compatibility and functionality for your specific vehicle model and are crucial for a successful repair.
The main part number is **A1669000220**, which is officially listed by Mercedes-Benz for the M-Class 166, EQC 293 and GLE 292 (including GLE Coupé C166) series and is therefore considered compatible for your vehicle model.
Another OEM part number is **A1679009428**, also a genuine Mercedes-Benz part, which is compatible for newer GLE models and is listed as certified on specialized platforms; however, compatibility with the C166 should be checked individually.