What is a Mercedes-Benz EQE N294 SUV airbag control unit?
The Mercedes-Benz EQE N294 SUV airbag control unit is the central safety unit that activates all passive occupant restraint systems in the event of an accident. It precisely monitors sensors, stores relevant crash data, and ensures the proper function and rapid deployment of all airbag modules and belt tensioners in the vehicle.
It acts as the brain of the restraint system, continuously monitoring vehicle dynamics and the status of safety sensors.
In the event of an impact, the control unit quickly deploys driver, passenger, side, window and knee airbags as well as seat belt pretensioners to minimize personal injury.
It is also connected to the 12-volt vehicle electrical system and has an emergency power supply that ensures the activation of the safety systems even if the main power supply is interrupted.
Why is the Mercedes-Benz EQE N294 SUV airbag control unit defective?
A defect in the Mercedes-Benz EQE N294 SUV airbag control unit can have a variety of causes, often due to internal software errors, voltage spikes, indelible crash data after an accident, or communication problems in the vehicle network, which requires specialized repair.
After an accident, the airbag control unit is often broken because it permanently stores crash data that must be deleted.
Electronic problems such as short circuits, age-related material fatigue, or corrosion on the connectors can also lead to failure.
Sometimes software errors or incorrect coding after an update are the reason why the control unit no longer functions properly or displays an error message.
Common error codes for Mercedes-Benz EQE N294 SUV airbag control unit repair
When diagnosing the Mercedes-Benz EQE N294 SUV airbag control unit, generic Mercedes error codes often occur. These indicate communication problems, internal memory errors or the power supply of the control unit and require precise analysis by specific diagnostic devices.
- B1000 → Control unit communication error → Problem in communication between airbag ECU and diagnostic tool or other vehicle control units.
- B1050 → Airbag control unit no communication → The airbag control unit does not respond to requests, often a serious failure.
- B1055 → Control unit self-test error → The control unit could not successfully complete its internal self-test, which indicates a hardware or software error.
- B1005 → Internal memory error (crash data) → Non-erasable crash data is stored in the internal memory, often after an accident, which requires repair or replacement.
- B1010 → Control unit coding error → The programming or coding of the control unit is faulty or incomplete, which affects functionality.
- B1070 → Control unit software error → A general software error within the airbag control unit that disrupts its operation.
- B1080 → Communication error with other control units (CAN bus) → Problems with data transmission via the CAN bus that prevent the airbag control unit from interacting with other systems.
- B1140 → Control unit voltage supply error → The airbag control unit is not receiving the correct supply voltage, which may lead to malfunctions or failure.
For precise error code retrieval and interpretation, the use of a Mercedes-specific diagnostic tool is essential.
Deleting crash data and repairing the control unit should only be carried out by specialist companies with the appropriate special software.
What part numbers are available for the Mercedes-Benz EQE N294 SUV airbag control unit repair?
There are no 100% verified OEM part numbers available from publicly accessible sources for the airbag control unit of the Mercedes-Benz EQE N294 SUV, as these are chassis number-specific. However, there is a known number for a steering wheel airbag module that can be clearly differentiated from the control unit.
The exact OEM part number for the airbag control unit can only be determined using the vehicle identification number (VIN) of the specific vehicle at an authorized Mercedes-Benz dealer or specialist workshop.
The specified number 000-860-07-04-1D28 refers to a steering wheel airbag module and is not relevant for the central airbag control unit, which controls the entire restraint system.
Although suppliers such as Autoliv, Bosch and Continental manufacture components, the specific OEM part numbers for the control unit of the EQE N294 SUV are not publicly listed in their catalogs.
Compatibility and model years of the Mercedes-Benz EQE N294 SUV airbag control unit
The airbag control unit is specifically designed for the Mercedes-Benz EQE SUV, internal designation N294 or X294, and is compatible for all model years from 2023/2024 up to and including the current 2025 models, although specific variants may exist depending on the equipment.
It fits all model variants of the all-electric EQE SUV, regardless of whether they are models with 4MATIC all-wheel drive or rear-wheel drive.
Integration into the modern electric vehicle architecture of the EQE SUV is standard and takes into account its special stiffness and safety concepts.
A precise determination of the appropriate unit for repair should always be made using the chassis number to ensure the correct hardware and software version.
Functionality and features of the Mercedes-Benz EQE N294 SUV airbag control unit
The Mercedes-Benz EQE N294 SUV airbag control unit acts as an intelligent control processor that monitors the vehicle for accident situations and specifically controls the activation of the airbags and belt tensioners to ensure optimal occupant safety.
It performs continuous self-diagnosis and sensor monitoring, including analysis of acceleration, collision and seat occupancy sensors.
In the event of an accident, it adaptively deploys front, side, window and knee airbags and tightens the seatbelts to distribute the impact energy.
The system has an emergency power supply and communicates with other important safety and assistance systems of the vehicle via the CAN bus.
Installation position and connections of the Mercedes-Benz EQE N294 SUV airbag control unit
The airbag control unit in the Mercedes-Benz EQE N294 SUV is located centrally in the vehicle, typically in the area of the center tunnel or behind the center console, to provide optimal protection and accessibility for diagnostic and repair purposes.
The connections include the power supply via the 12-volt vehicle electrical system as well as various sensor connections for acceleration, pressure and seat occupancy.
Signal connections lead to the individual airbags, the seat belt pretensioners and the warning lights in the cockpit, while communication lines enable connection to the vehicle's CAN bus.
All wiring complies with Mercedes-Benz's high safety standards for electric vehicles and is secured for maximum reliability.
Special features and variants of the Mercedes-Benz EQE N294 SUV airbag control unit repair
Repairing the Mercedes-Benz EQE N294 SUV airbag control unit requires specialized expertise and equipment because it is designed for electric vehicles, controls a variety of restraint systems, and requires precise coordination with the vehicle architecture.
It is a central control unit that operates window and knee airbags in addition to the standard airbags, thereby significantly improving occupant protection.
The unit is specifically designed for electric vehicles and takes into account integration into the high-voltage electrical system as well as emergency shutdown mechanisms for electrical safety.
Repair and replacement must be carried out according to strict manufacturer protocols and with specific diagnostic equipment to ensure full functionality and safety guarantees and to avoid further failures.