What is a Kia K5 DL3 airbag control unit?
The Kia K5 DL3 airbag control unit is the central safety unit that ensures occupant protection in the event of an accident. It monitors airbag and seatbelt systems, receives sensor data, and precisely deploys airbags and seatbelt pretensioners. It also stores important crash and diagnostic data, which is essential for vehicle safety.
This module, also called the SRS Control Module, is responsible for the precise control of the restraint systems. It is essential for safety and requires professional replacement after each deployment.
Why is the Kia K5 DL3 airbag control unit defective?
The Kia K5 DL3 airbag control unit can be defective because it irretrievably stores crash data after an accident, thus preventing further deployment. Internal malfunctions, overvoltage, or short circuits can also lead to failure. This is often indicated by a permanently illuminated airbag warning light, which requires immediate repair.
A common cause of a defect is the storage of crash data after an airbag deployment. The control unit is then blocked and must be replaced to restore the full functionality of the safety system.
Age-related wear and tear or water damage can also lead to failure, necessitating a Kia K5 DL3 airbag control unit repair or replacement. A defective module cannot provide a correct diagnosis.
Common error codes for Kia K5 DL3 airbag control unit repair
During Kia K5 DL3 airbag control unit repairs, specific error codes occur that directly indicate problems with the SRS module or its connected systems. These codes are crucial for a precise diagnosis, as they indicate communication problems, resistance issues, or internal module faults, allowing for targeted repairs.
- **B1000** → Control unit communication error → **Cause:** Internal error of the airbag control unit or malfunction in the CAN bus system.
- **B1335** → Right Front Crash Sensor Wrong ID → **Cause:** Incompatibility or defect of the sensor detected by the airbag module.
- **B1346** → Driver airbag resistance too high → **Cause:** Damaged wiring, faulty connector or problem in the driver airbag module.
- **B1347** → Driver airbag resistance too low → **Cause:** Short circuit in the wiring or in the driver airbag module.
- **B1481** → Driver airbag resistance too high (1st and 2nd stage) → **Cause:** Open circuit in the two-stage driver airbag circuit.
- **B1378** → Front driver's side airbag, resistance too high → **Cause:** Open circuit or defect in the driver's side airbag.
What part numbers are available for the Kia K5 DL3 airbag control unit repair?
For the Kia K5 DL3 airbag control unit repair, there are specific OEM part numbers from Kia as well as compatible numbers from reputable suppliers such as Continental and Autoliv. These precisely validated part numbers ensure the exact fit and correct function of the replacement part for models from 2021 onwards, which is essential for the safety of the airbag system.
The following OEM part numbers are verified for the airbag control unit of the Kia K5 DL3 (model years 2021-2024) and can be used for repair:
- **Kia (OEM):** 95940-L5100
- **Kia (OEM):** 95940-L5101
- **Kia (OEM):** 95940-L5110
- **Continental / Autoliv (OEM supplier):** A2C59512985
- **Continental / Autoliv (OEM supplier):** A2C59512664
These numbers come from official sources and guarantee compatibility for a successful Kia K5 DL3 airbag control unit repair in any qualified workshop.