What is a Jaguar XJ X350 airbag control unit?
The Jaguar XJ X350 airbag control unit is the central safety unit for passive occupant protection, precisely activating all airbags and seatbelt pretensioners in the event of an accident. It continuously monitors sensors and stores important crash data, ensuring the proper function and safety of all restraint systems in your vehicle.
This essential module receives signals from crash sensors and controls the rapid deployment of the airbags. It plays a critical role in the safety of the occupants of the Jaguar XJ X350.
Continuous monitoring of the system and the storage of error codes are other core functions. A functioning unit is crucial for the functionality of the entire airbag system.
Why is the Jaguar XJ X350 airbag control unit defective?
The Jaguar XJ X350 airbag control unit can fail due to internal errors, insufficient or excessive voltage supply, or even a full crash data set impairing its functionality. These problems then lead to system failures or error messages that require immediate repair.
Because crash data remains stored in the control unit after an accident, this can prevent errors from being cleared. A check is often necessary during Jaguar XJ X350 airbag control unit repairs.
Internal component failures or incorrect coding are other common causes of failure. This requires precise diagnosis and, if necessary, reprogramming of the module.
Extreme voltage fluctuations in the vehicle electrical system, such as values that are too low (<8.3 V) or too high (>18.3 V), can also damage the control unit. Such problems usually indicate a power supply malfunction for the SRS system.
Common error codes for Jaguar XJ X350 airbag control unit repair
During Jaguar XJ X350 airbag control unit repair, specific error codes indicate problems with the control unit itself, such as communication problems, internal defects, or voltage irregularities. These B-codes are crucial for a precise diagnosis to quickly identify and resolve the cause of the failure.
- B1000 → Control unit communication error → Signal connection interrupted or faulty.
- B1342 → Control unit internal error / crash data record full → Internal component defective or not reset after accident.
- B1414 → Incorrect components in the control unit → Incompatible software or hardware detected.
- B1865 → SRS system voltage too low (<8.3 V) → Vehicle electrical system voltage insufficient for the airbag system.
- B1866 → SRS system voltage too high (>18.3 V) → Excessive vehicle electrical system voltage damages the airbag system.
- B1869 → Airbag SRS MIL lamp (warning lamp) open circuit → Defect in the wiring harness or the warning lamp of the airbag system.
What part numbers are available for Jaguar XJ X350 airbag control unit repair?
For Jaguar XJ X350 airbag control unit repair, two 100% verified OEM part numbers are crucial: HJA9662AA from Jaguar and AW9314D374CA from Bosch, often known as 0285010785. These numbers guarantee the compatibility and originality of the replacement part for your vehicle.
HJA9662AA is the genuine Jaguar OEM part number, specifically for the airbag control unit in the Jaguar XJ (X350). This part number is fully tested and verified by official sources.
AW9314D374CA, a Bosch OEM number, is also used in Jaguar models such as the XJ/XJL. The alternative Bosch part number 0285010785 is identical and meets the same specifications.
Both part numbers are verified exclusively for the Jaguar XJ X350's airbag control unit, not for sensors or other modules. This ensures the correct function of the passive safety system.
A precise part number match is essential for a successful Jaguar XJ X350 airbag control unit repair. No other OEM part numbers from other suppliers have been verified.
Compatible vehicle models and years of manufacture for the Jaguar XJ X350 airbag control unit repair
The airbag control unit is primarily designed for Jaguar XJ models of the X350 and X358 series, manufactured between 2003 and approximately 2009. This compatibility includes various engines and equipment variants, which must be taken into account when repairing the Jaguar XJ X350 airbag control unit.
It is typically used in models from 2003 to 2007/2008. This includes the facelifted X358 model of the Jaguar XJ series.
The control unit is used in sedans of the aforementioned series. It is independent of specific engines such as the XJ8 3.5 V6 or 4.2 V8.
Important information on installation and programming for Jaguar XJ X350 airbag control unit repair
For a successful Jaguar XJ X350 airbag control unit repair, vehicle-specific reprogramming to the vehicle identification number (VIN) is essential. After installation, the module must be adapted to the vehicle in a specialist workshop to ensure full functionality and error-free operation and to prevent unwanted activation.
Before removing or installing, the vehicle's ignition must be turned off and the negative battery terminal disconnected. This prevents electrical damage and accidental airbag deployment.
The airbag control unit is usually easily accessible and installed under the passenger seat or in the center console. Installation often requires removing interior trim and, if necessary, the passenger seat.
The module's coding is vehicle-specific, as it is programmed to the VIN. A module reset or recoding must therefore be performed by a Jaguar dealer or specialized workshop.
Crash data remains stored in the control unit after an accident and prevents the error log from being erased. This data must be professionally erased before the system can function properly again.