What is a Hyundai i800 TQ airbag control unit?
The Hyundai i800 TQ airbag control unit is the central safety unit that activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors acceleration sensors and stores important crash data to ensure precise and safe deployment in an emergency. This is crucial for safety during repair of this component.
This electronic module is responsible for controlling the vehicle's passive safety systems. It ensures that the airbags deploy only when necessary and with the correct intensity.
The control unit also stores all relevant error messages and diagnostic codes. These are essential for accurate fault analysis during Hyundai i800 TQ airbag control unit repairs.
Why is the Hyundai i800 TQ airbag control unit defective?
The Hyundai i800 TQ airbag control unit often fails because it stores crash data after an accident, necessitating reprogramming, or internal electronic errors such as communication problems occur. Aging, moisture damage, or overvoltage can also cause failure, making repairs necessary.
After an airbag is deployed, the control unit is usually disabled for safety reasons. It must then either be reset or replaced to restore functionality.
Internal components can be damaged due to age-related wear or external influences. This leads to typical errors such as communication problems or erroneous resistance measurements.
A faulty airbag control unit can impair the function of the entire airbag system. Prompt diagnosis and repair are critical for vehicle safety.
Common error codes for Hyundai i800 TQ airbag control unit repair
During Hyundai i800 TQ airbag control unit repairs, specific error codes may occur that indicate internal problems with the control unit or its connectors. These codes help diagnose the exact cause of a failure and take targeted corrective action.
- B1000 → Control unit communication error → Signals a problem in the data transmission of the airbag ECU.
- B1346 / B134600 → Driver airbag resistance too high (1st stage) → Indicates increased resistance in the driver airbag circuit, often an indicator of a problem in the control unit.
- B1378 → Airbag System Error General / Airbag Resistance Too High → A general error indicating increased resistance within the airbag system.
- B1382 → Side airbag resistance too high → Indicates an increased resistance in the side airbag circuit.
- B1481 → Driver airbag resistance too high (additional level) → A variation of the driver airbag resistance problem that requires further diagnosis.
These error codes are primarily related to the airbag control unit itself and allow for precise diagnosis when the system is malfunctioning. Eliminating these errors is crucial for a successful airbag control unit repair on the Hyundai i800 TQ.
What part numbers are available for the Hyundai i800 TQ airbag control unit repair?
For Hyundai i800 TQ airbag control unit repairs, two original Hyundai OEM part numbers are primarily relevant, ensuring exact compatibility. Using these specific numbers is crucial to ensuring the safety and functionality of the airbag system after repair.
The main part number for the Hyundai i800 TQ airbag control unit is 95700-4H100 from Hyundai (OEM).
Another relevant Hyundai OEM number is 569004H100WK, which is specifically assigned to the steering airbag module and also applies to the i800/H1 TQ series.
No clearly documented alternative or supplier part numbers for the exact i800 TQ control unit have been found. Therefore, it is recommended to rely on these original Hyundai numbers.
These numbers are crucial for correctly selecting and performing the repair or replacement of the airbag control unit.