What is a Honda Civic 10th Gen airbag control module?
The Honda Civic 10th Gen airbag control unit is the central safety unit that activates all occupant restraint systems, such as front, side, and curtain airbags, as well as seatbelt pretensioners, in the event of an accident. It precisely monitors sensors, stores important crash data, and ensures the proper function and deployment of all airbag modules for maximum occupant safety in your vehicle.
This essential module, also known as the SRS Control Module, is responsible for the continuous monitoring of the entire airbag system. It ensures that all required restraint systems are deployed quickly and correctly in the event of a collision.
Precise control of airbags and seatbelt pretensioners is crucial for protecting vehicle occupants. Proper functioning is therefore essential for safety and prevents fault indications such as the illuminated airbag warning light.
Why is the Honda Civic 10th Gen airbag control unit defective?
The Honda Civic 10th Gen airbag control unit often fails due to internal memory errors (EEPROM), damaged hardware components, or crash data stored permanently after an accident that triggers an error message. Such damage typically requires a professional Honda Civic 10th Gen airbag control unit repair or module replacement.
Common causes of failure include internal communication errors or voltage problems that impair functionality. Improper disassembly or extreme temperature fluctuations can also damage the control unit, necessitating repair.
Especially after an accident, the module permanently stores crash data that cannot be easily erased, making a Honda Civic 10th Gen airbag control unit repair inevitable. Without repair, the airbag system remains inactive and the warning light remains permanently on.
Common error codes for Honda Civic 10th Gen airbag control unit repair
During Honda Civic 10th Gen airbag control module repair, specific trouble codes may occur that indicate internal problems or communication issues with the module. These include codes for stored crash data (B1200) or hardware defects (B1400), which require precise diagnosis and expertise to restore the safety system.
These error codes indicate a problem with the airbag control unit itself, not with external sensors or other components. A precise diagnosis is the first step toward a successful Honda Civic 10th Gen airbag control unit repair.
The airbag warning light is activated immediately as soon as one of these error codes is stored in the control unit's error memory, signaling that the system may not be functioning.
- B1000: Internal control unit communication error → Indicates problems with data transmission within the airbag control unit.
- B1100: Internal memory error (EEPROM) → Indicates corruption of the non-volatile memory in the module.
- B1200: Crash data storage active → Means that the control unit has permanently saved crash data after an accident and requires repair.
- B1300: No communication with control unit → The diagnostic device cannot establish a connection to the airbag control unit.
- B1400: Internal hardware error → Indicates a defect in the electronic hardware of the airbag control unit.
- B1500: Airbag control unit power supply error → A problem with the module's power supply was detected.
What part numbers are available for the Honda Civic 10th Gen airbag control unit repair?
For Honda Civic 10th Gen airbag control unit repair, there are several compatible OEM part numbers from Honda that often perform the same function. Most older versions have been replaced with newer part numbers, and all original control units are ready to install without relearning, making Honda Civic 10th Gen airbag control unit repair easier.
It's important to use the correct part number when repairing or replacing a part to ensure compatibility. All parts listed are genuine Honda parts and are specifically designed for the 10th-generation Civic.
These specific OEM numbers make it easier to find a suitable replacement part or to commission a specialized Honda Civic 10th Gen airbag control unit repair.
Part number | Manufacturer | type |
---|---|---|
77960-TBA-A06 | Honda | Original |
77960-TBA-A05 | Honda | Original |
77960-TBA-A02 | Honda | Original |
77960-TBA-A04 | Honda | Original |
77960-TBA-A03 | Honda | Original |
77960-TBA-A01 | Honda | Original |
77960-TGG-A03 | Honda | Original |
77960-TGH-A02 | Honda | Original |
77960-TGH-A01 | Honda | Original |
77960-TGNT-G23 | Honda | Original |
77960-SMG-G014-M1 | Honda | Original |
Technical details of the Honda Civic 10th Gen airbag control unit
The Honda Civic 10th Gen airbag control unit is designed for the FC/FK generation (approx. 2015-2022) and serves as the central control unit for all SRS components, from front airbags to curtain airbags and seat belt pretensioners. It processes signals from impact sensors and seat occupancy sensors to ensure optimal occupant safety in the event of a crash and is ready for immediate use after repair without the need for relearning.
This module is strategically positioned centrally in the vehicle, often under the center tunnel or center console. This position ensures optimal wiring to all sensors and airbag units.
The control unit continuously monitors all relevant sensors and can differentiate between different types of impact. This allows only the necessary airbag units to be activated, avoiding unnecessary deployments.
A special feature is that many of these Honda control units do not require reprogramming after a professional Honda Civic 10th Gen airbag control unit repair, which significantly simplifies reinstallation. This saves time and money in the workshop.