What is a Ford Probe Mk1 airbag control unit?
The Ford Probe Mk1 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle, essential for safety after a successful Ford Probe Mk1 airbag control unit repair.
It processes sensor and crash data in real time to deploy the airbags if necessary. The module is designed for high reliability and safe performance.
The control unit's software is coded specifically for each vehicle and stores relevant crash data and error codes. It operates on a 12V vehicle battery.
Why is the Ford Probe Mk1 airbag control unit faulty?
The Ford Probe Mk1 airbag control unit often fails due to internal electronic faults (e.g., blown fuses or component failure), voltage problems, or permanently stored crash data after an accident. This then leads to the airbag warning light remaining permanently illuminated and requires a Ford Probe Mk1 airbag control unit repair.
Internal errors such as a faulty diagnostic monitor or internal fuse (Code 51) often require repair of the control unit. Power supply problems (Code 52) or internal circuit errors (Code 53) are also common.
After an accident, the modules store crash data; this data must be erased before the system can be operational again. Improper programming or wiring can also lead to errors.
Common error codes for Ford Probe Mk1 airbag control unit repair
During Ford Probe Mk1 airbag control unit repairs, specific error codes are often detected that indicate internal problems with the control unit or its peripherals. Reading these codes is crucial for identifying the cause of the illuminated airbag warning light and initiating the necessary repair.
- 12 : Low battery voltage – The airbag control unit is not receiving enough voltage.
- 13 : Airbag Circuit Fault (Short to Ground) – A problem in the control module’s airbag circuit.
- 21 : Safing sensor incorrectly mounted – The safety sensor within the control unit is incorrectly positioned.
- 22 : Safing sensor output short circuit to battery – Short circuit in the output circuit of the safing sensor.
- 23 : Safing sensor input signal or return circuit open – Interruption in the signal circuit of the safing sensor.
- 32 : Driver side airbag / safing sensor: high resistance or open – Resistance problem in the driver side airbag circuit.
- 33 : Pin 7 in the diagnostic monitor not grounded – A programming or wiring error in the control unit itself.
- 34 : Driver side airbag / safing sensor: low resistance or short circuit – Short circuit in the driver side airbag circuit.
- 51 : Internal fuse in the control unit blown – An internal defect, often caused by a previous short circuit.
- 52 : Backup Power Supply Error – Problem with the module’s internal emergency power supply.
- 53 : Internal Airbag Control Module Fault – A general internal module fault that requires a Ford Probe Mk1 Airbag Control Module repair.
What part numbers are available for the Ford Probe Mk1 airbag control unit repair?
For the Ford Probe Mk1 airbag control unit repair, several specific Ford OEM part numbers are verified to ensure the compatibility and functionality of the replacement or repair part. Using one of these original numbers is crucial to ensure the safety of the airbag system.
- F5UZ-14B056-A : Ford – Genuine OEM Main Airbag Control Module.
- F5AF-14B056-AA : Ford – OEM (related base number), often associated with the main module.
- F52Z-61044-A74AAC : Ford – OEM airbag module (Air Bag Module), suitable for your vehicle.
- F62Z-61044-A74-AAB : Ford – OEM passenger airbag module type, important for the passenger side.
- F42Z-61044-A74-AAA : Ford – OEM airbag module, another genuine part number.
These part numbers are all genuine Ford OEM parts and have been verified multiple times. They fit the Ford Probe Mk1 from 1994-1997, including the 2.0L 4-cylinder and 2.5L 6-cylinder engines.
Compatibility and installation position for the Ford Probe Mk1 airbag control unit repair
Compatibility and correct installation position are of utmost importance when repairing the Ford Probe Mk1 airbag control unit to ensure vehicle safety. The control unit is specifically designed for the Ford Probe Mk1 and is centrally located in the vehicle's interior.
The airbag control unit is specifically designed for the Ford Probe Mk1 (model years approximately 1993–1997). It supports both the 4-cylinder 2.0L and 6-cylinder 2.5L engine variants, regardless of transmission type.
The installation position is usually centrally located in the vehicle, near the center console or below the dashboard. This ensures optimal processing of the sensor data and fast signal transmission.
The module is connected via multi-plug connectors with color-coded cables. An important safety precaution is to disconnect the vehicle battery before performing any work on the airbag system to prevent accidental deployment and ensure a safe Ford Probe Mk1 airbag control unit repair.