What is a Ford Maverick Mk2 airbag control unit?
The Ford Maverick Mk2 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle.
This essential module, also known as the Restraint Control Module (RCM), is vital for the safety of vehicle occupants. It continuously processes signals from impact sensors and deploys airbags and seatbelt pretensioners as needed.
It is specifically designed for the second-generation Ford Maverick (Mk2), built between 2001 and 2004. Compatible with the 2.0-liter 16V petrol engine and 5-speed manual transmission variants.
Why is the Ford Maverick Mk2 airbag control unit faulty?
The Ford Maverick Mk2 airbag control unit may be defective because it stores crash data after an accident, triggering a system error. Age-related internal component failures, such as short circuits or overvoltage damage, can also impair function and necessitate a Ford Maverick Mk2 airbag control unit repair.
A common reason is the storage of crash data after an impact, even in minor accidents. This causes the airbag warning light to activate and prevents the system from functioning.
In addition, communication errors with other vehicle control units or internal malfunctions can lead to failure. Such problems often manifest themselves as specific error codes in the diagnostic device and require professional diagnosis.
Moisture, corrosion at connectors, or voltage fluctuations in the vehicle electrical system can also cause defects that damage the module. A comprehensive fault analysis is crucial to determine the exact cause and successfully repair the Ford Maverick Mk2 airbag control unit.
Common error codes for Ford Maverick Mk2 airbag control unit repair
During a Ford Maverick Mk2 airbag control unit repair, specific trouble codes indicate problems directly related to the control unit. These OBD-II B codes signal malfunctions in the airbag circuits, internal control unit errors, or stored crash data and are crucial for diagnosis.
- B0001 → Driver side airbag circuit fault → High resistance or open circuit in the airbag circuit, directly detected by the control module.
- B0002 → Driver side airbag second deployment phase → Error in the control logic for the second deployment stage of the driver airbag.
- B0003 → Airbag deployment control → General malfunction in the airbag deployment control unit.
- B0020 → Passenger side airbag circuit error → Malfunction or open circuit in the passenger side airbag circuit.
- B0028 → Passenger side airbag second deployment stage → Problem with the control of the second deployment stage of the passenger airbag.
- B0070 → Impact sensor communication/error → Communication malfunction or internal error of an impact sensor affecting the control unit.
- B1193 → Crash data stored in the airbag control unit → After an accident, data is stored in the control unit that requires a reset.
- U3000 → Control unit error or general error in the airbag control unit → Internal hardware or software error of the airbag module.
- U2017 → Communication error between airbag control unit and other vehicle control units → Malfunction in the CAN bus or other communication lines.
What part numbers are available for the Ford Maverick Mk2 airbag control unit repair?
For Ford Maverick Mk2 airbag control unit repair, there are currently no exact, 100% verified OEM part numbers for the control unit itself publicly available. Most of the numbers found refer to airbag modules or inflators, not the central control unit.
Research revealed that part numbers such as NZ6Z26042D94B belong to curtain airbag inflators. No specific OEM numbers from Bosch, Continental, or Siemens were found for the control unit in the Ford Maverick Mk2.
For verified identification of the airbag control unit, we recommend accessing official Ford spare parts catalogs or professional databases such as TecDoc. There, the chassis number and model year can be used for precise identification.
Although specific part numbers are missing, a Ford Maverick Mk2 airbag control unit repair is often possible without them, as many service providers specialize in the internal hardware. A reset service can restore the module to working order even if the original part number isn't available, thus avoiding the need to purchase a new one.