What is a Fiat Tempra 159 airbag control unit?
The Fiat Tempra 159 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle.
This electronic module is responsible for monitoring and precisely controlling the entire airbag system. It ensures the safety of vehicle occupants by quickly deploying the airbags in an emergency.
It typically operates with an on-board voltage of 12 to 14.5 volts, matching the Fiat Tempra's vehicle battery. Diagnosis is often performed via the standardized OBD interface, even in older models like the Tempra 159.
The control unit continuously collects data from crash and acceleration sensors in the vehicle. It compares these measured values with preprogrammed thresholds to reliably detect critical situations.
If these thresholds are exceeded, it initiates the deployment of the airbags within milliseconds to provide protection. The connection to the airbags is established via special connectors with gold-plated contacts that ensure reliable signal transmission.
Why is the Fiat Tempra 159 airbag control unit defective?
A Fiat Tempra 159 airbag control unit is often defective because it loses its triggering function after an accident or suffers internal hardware damage due to aging. Typical error codes such as B1000 or B1001 are then stored in the error log, necessitating a Fiat Tempra 159 airbag control unit repair.
After a traffic accident, the control unit stores accident data and is often not reusable. This requires replacement or professional repair of the unit to restore the airbag system to full functionality.
Internal defects such as defective chips or corrosion on components can also lead to failure. Such problems significantly impair signal processing and the ability to deploy airbags.
Sometimes the defect is also due to communication errors with other control units or faulty cable connections. A detailed diagnosis is crucial to identify the exact cause of the failure.
Common error codes for Fiat Tempra 159 airbag control unit repair
When repairing the Fiat Tempra 159 airbag control unit, specific error codes often occur, indicating communication problems or internal defects within the module. These codes are crucial for a precise diagnosis and identifying the necessary repair measures for the control unit.
- B1000 → Control unit communication error → This code signals problems in the data transmission between the airbag control unit and other vehicle systems or internal processing errors.
- B1001 → Control unit defective → Indicates an internal hardware error, such as a defective chip or a malfunction of the electronics in the airbag control unit, which requires repair or replacement.
What part numbers are available for the Fiat Tempra 159 airbag control unit repair?
For Fiat Tempra 159 airbag control unit repairs, several exact OEM part numbers are relevant, ensuring 100% compatibility with your vehicle. These numbers come from Fiat itself or recognized suppliers such as Bosch and are validated for the Fiat Tempra 159 model.
Original Fiat OEM part numbers for the airbag control unit of the Fiat Tempra (Type 159) are 1480999080, 550539700, 51701716 and 55198018. These have been confirmed by verified sources such as Teilehaber.de and Vokparts.eu and are essential for the Fiat Tempra 159 airbag control unit repair.
Additionally, the Bosch part number 391035 is one of the relevant OEM numbers for this airbag control unit. Bosch is a well-known original equipment manufacturer for such components and supplies high-quality original parts.
The part numbers listed are specifically designed for the Fiat Tempra 159 from the 1990–2000 model period. When repairing the Fiat Tempra 159 airbag control unit, always ensure exact matching to ensure vehicle safety.