What is a Dodge Viper GTS SR II airbag control module?
The airbag control unit for the Dodge Viper GTS SR II is the central safety component that evaluates critical data from sensors in the event of an accident to precisely deploy airbags and other restraint systems. It also stores important crash information and is essential for the safety of the occupants of your Dodge Viper GTS SR II.
This module, also known as the Occupant Restraint Controller (ORC) or Occupant Restraint Module (ORM), continuously monitors the status of the occupant protection system. It was specifically developed for Dodge Viper GTS Coupé SR II models from 1996 to 2002.
The control unit ensures that the airbags deploy at the right moment and with the correct intensity. It is a significant component for the driving safety of a high-performance sports car.
Why is the Dodge Viper GTS SR II airbag control unit defective?
The Dodge Viper GTS SR II airbag control unit often becomes defective because it stores crash data after an accident that requires a reset, or is affected by internal electronic errors and age-related wear and tear, which compromises the function of the entire airbag system and makes a professional Dodge Viper GTS SR II airbag control unit repair necessary.
Common causes of a defect include overvoltage in the vehicle's electrical system, internal hardware errors, or even water damage. After an impact, the module typically needs to be reset because it irreversibly stores one-time crash data.
This stored data prevents the control unit from being reused, even if the module itself is functional. A professional Dodge Viper GTS SR II airbag control unit repair can remedy this.
Common error codes for Dodge Viper GTS SR II airbag control unit repair
During Dodge Viper GTS SR II airbag control unit repair, specific error codes often occur that directly indicate problems with the control unit itself, such as communication errors (B1000), internal module defects (B1015, B1139) or stored crash data (B1649), which require a precise diagnosis.
These error codes are typical for Chrysler-Dodge airbag control units and are read via OBD-II diagnostic tools. They require precise identification of the problem.
A correct diagnosis is the first step to successful Dodge Viper GTS SR II airbag control unit repair to restore the full functionality of the safety system.
- B1000 → Control unit communication error → Internal error or problem with the data line.
- B1015 → Faulty airbag control module → Internal hardware or software error in the control module.
- B1139 → SRS module error → General internal system error of the airbag module.
- B1193 → Airbag control unit related error → Specific error that refers to the control unit itself.
- B1206 → Airbag Control Module (RCM) Error → Restraint system control module error.
- B1342 → SRS system fault → A higher-level fault within the occupant restraint system.
- B1620 → SRS system error / control unit error → A combination of system and control unit errors.
- B1649 → Crash data detected in the control unit → Module has stored impact event, requires reset.
What part numbers are available for the Dodge Viper GTS SR II airbag control unit repair?
For Dodge Viper GTS SR II airbag control unit repairs, specific OEM part numbers from Chrysler and Mopar are relevant, ensuring exact fit and function. These include 68303219AA and P04865582AB for airbag control units, as well as 6KE78DX9AB as an OEM replacement module, which are validated for various Viper model years.
These OEM part numbers are directly compatible with the Dodge Viper GTS SR II and are sourced from reliable sources. They ensure that the replacement part meets the vehicle manufacturer's specifications.
It is important to use the correct part number to ensure proper airbag system function after the Dodge Viper GTS SR II airbag control unit repair. Bosch, Continental, Siemens, or Autoliv are not confirmed as specific OEM part numbers for these models.
- 68303219AA → Chrysler (OEM) → Original airbag control module (SRS ORC/ORM Occupant Control Module), validated for Dodge Viper 2017.
- P04865582AB → Chrysler (OEM) → Original airbag control module (SRS ORC/ORM Occupant Control Module), validated for Dodge Viper 2003.
- 6KE78DX9AB → Mopar (Chrysler OEM) → Genuine airbag component, alternative OEM number for airbag control module, validated for Dodge Viper SRT GTS 2014.
Functionality and technical specifications of the Dodge Viper GTS SR II airbag control unit
The Dodge Viper GTS SR II's airbag control unit is a sophisticated module that receives signals from crash and acceleration sensors to decide within milliseconds which airbags need to be deployed. It is designed for a 12V vehicle electrical system and features an OBD-II interface for diagnostics.
It continuously monitors vehicle dynamics and impact intensity. The control unit controls both driver and passenger airbags, ensuring precise deployment based on the accident situation.
The module was developed for the sporty driving style of the Viper and is adapted to the high performance requirements of the 8.0 liter V10 engine, which produces 450 hp.
Installation position and connections
The airbag control unit is typically installed centrally in the interior of the Dodge Viper GTS SR II. It is often located behind the center console or under the dashboard to ensure optimal protection.
It is connected to the rest of the safety system via a standardized airbag data bus. The connections include the 12V supply voltage, ground connections, and signal inputs from all relevant sensors.
It also features signal outputs to the airbags and pyrotechnic trigger units. A vehicle diagnostics interface (OBD-II) is also available to read system errors and enable efficient Dodge Viper GTS SR II airbag control unit repair.