What is a Dodge Viper ACR VX II airbag control module?
The Dodge Viper ACR VX II airbag control unit is the heart of the occupant protection system (SRS), which instantly deploys the airbags and seatbelt pretensioners in the event of a crash. It continuously monitors sensor data, stores important crash information, and is critical to the safety of the occupants of this high-performance sports car.
This central control unit, also known as the Occupant Restraint Controller (ORC), ensures that all restraint systems function precisely and reliably in an emergency.
It receives signals from acceleration sensors and processes them in milliseconds. After an accident, the module is often recoverable, allowing for a cost-effective Dodge Viper ACR VX II airbag control unit repair.
Why is the Dodge Viper ACR VX II airbag control unit defective?
A Dodge Viper ACR VX II airbag control unit often fails because it stores crash data after an impact, preventing it from restarting or resetting. Internal hardware errors, power supply issues, or communication problems can also cause failure, activating the airbag warning light and requiring professional diagnostics.
Because the control unit is a highly sensitive electronic component, aging, moisture or overvoltage can also cause a defect.
The module then stores error messages that prevent the security system from functioning. Such errors require a precise diagnosis of the system to resolve the problem or perform a repair.
Common error codes for Dodge Viper ACR VX II airbag control unit repair
During Dodge Viper ACR VX II airbag control module repair, specific error codes occur that directly indicate problems within the control module itself. These OBD-II B-codes allow for precise diagnosis of internal malfunctions, communication issues, or stored crash data that require a safe module reset.
- B1000 → Control unit communication error → Often caused by damaged cables or an internal module defect.
- B1100 → Airbag control unit internal diagnostic error → Indicates a malfunction of the internal acceleration sensors in the module.
- B1101 → Internal error register power supply (Stored Energy Logic) → There is a problem with the internal power supply of the control unit.
- B1102 → Driver airbag energy storage system error → The driver airbag control circuit has a problem.
- B1103 → Passenger airbag energy storage system fault → The passenger airbag control circuit is faulty.
- B1104 → Airbag control unit output circuit driver open → An open circuit in the driver airbag deployment circuit.
- B1105 → Airbag control unit output circuit passenger open → An open circuit in the passenger airbag deployment circuit.
- B1110 → Airbag control unit short circuit or open circuit, communication loss → Indicates an internal short circuit or missing connection to the control unit.
- B1120 → Airbag control unit memory error or crash data present → The module has an internal memory error or crash data must be deleted.
What part numbers are available for the Dodge Viper ACR VX II airbag control unit repair?
For Dodge Viper ACR VX II airbag control module repairs, specific Mopar OEM part numbers are critical to ensure proper fit and function. Depending on the vehicle's year of manufacture, these are the 4848802AE series for 1997-2002 models and the 68230542AB for the newer 2009-2010 ACR-X models, ensuring exact compatibility.
These part numbers are verified by official sources like MoparPartsGiant and ensure OEM quality for your Dodge Viper ACR VX II airbag control unit repair.
They are the only 100% verified and model compatible OEM numbers for these specific vehicles.
- Mopar 4848802AE → Genuine part for Dodge Viper GTS, RT/10 (1997-2002), including ACR variants of these models.
- Mopar 4848802AB, 4848802AC, 4848802AD → Older replacement variants replaced by 4848802AE and are fully compatible.
- Mopar 68230542AB → Original Airbag Control Module for Dodge Viper ACR-X models from 2009-2010 (8.4L engine).
Technical specifications of the Dodge Viper ACR VX II airbag control unit
The Dodge Viper ACR VX II airbag control unit is a sophisticated Occupant Restraint Controller (ORC) designed to precisely control airbags and seatbelt pretensioners during a collision. It communicates via CAN buses, receives sensor data, and can be reset by specialized services after an accident, simplifying Dodge Viper ACR VX II airbag control unit repair.
The function of this type of system is to ensure that the restraint systems are correctly deployed in the event of an accident.
The module is connected to the vehicle bus system via specific connectors. The factory firmware of the control unit is generally not user-modifiable.
Compatible vehicle models for the Dodge Viper ACR VX II airbag control unit
The Dodge Viper ACR VX II airbag control unit is specifically designed for the fifth-generation Dodge Viper ACR models (approximately 2013-2017) and the 2009-2010 ACR-X models. Its compatibility includes vehicles equipped with the advanced ACR aerodynamic and performance package and ensures precise operation.
It is crucial to note the exact year specification for the Dodge Viper ACR VX II airbag control unit repair.
Use on other Viper generations is not intended or requires extensive modification. The correct part number ensures perfect fit and functionality in the vehicle.
Functionality and special features of the Dodge Viper ACR VX II airbag control unit
The Dodge Viper ACR VX II airbag control module continuously monitors sensors to precisely deploy the airbags and seatbelt pretensioners when defined thresholds are exceeded. Its safety diagnostic features detect system errors and activate warning lights, while the ability to reset after a crash extends the module's lifespan and reduces the cost of a Dodge Viper ACR VX II airbag control module repair.
At the same time, it controls the belt tensioners to ensure optimal safety for passengers.
After an accident, the control unit can be restored via a reset service, eliminating the need for expensive module replacement. The control unit's software is tuned to the Viper ACR's high-performance parameters.
Installation position and connections on the Dodge Viper ACR VX II airbag control unit
The Dodge Viper ACR VX II airbag control unit is typically mounted centrally in the vehicle, usually under the dashboard or in the center console, to ensure optimal signal processing. It features multiple keyed connectors for power, sensors, CAN bus, and deployment units, enabling precise installation for a successful Dodge Viper ACR VX II airbag control unit repair.
This central position allows the control unit to quickly access all relevant sensor data.
The connectors are specially coded to prevent misconnections and maximize safety. Airbag modules in the steering wheel are connected to the control unit via special wiring harnesses.