What is a Dodge Omni P airbag control module?
A Dodge Omni P airbag control unit is the central safety unit in your vehicle, crucial for occupant safety in the event of a collision. It continuously monitors crash sensors, interprets collision signals at lightning speed, and deploys the airbags and seatbelt pretensioners in an emergency to provide optimal passenger protection.
This module stores important crash data and diagnoses internal system errors. After a deployment or failure, a professional repair of the Dodge Omni P airbag control unit is often a more economical alternative to purchasing a new one.
Why is the Dodge Omni P airbag control unit defective?
The Dodge Omni P airbag control unit often becomes defective because it permanently stores crash data after an accident that needs to be erased, or because internal electronic errors occur due to aging or voltage spikes that require a functional Dodge Omni P airbag control unit repair.
Because crash sensors send sensitive information, a short circuit or malfunction of the control unit can result in a permanently illuminated airbag warning light.
Failure can also be caused by internal software errors or the device's inability to maintain connection to other vehicle systems, which requires immediate diagnosis.
Common error codes for Dodge Omni P airbag control unit repair
When diagnosing for Dodge Omni P airbag control unit repair, generic error codes often occur that indicate internal control unit defects or communication problems, since specific model codes for the Dodge Omni P are not clearly documented.
- B1000 → Control unit communication error → The airbag ECU cannot communicate correctly with other systems, indicating an internal defect or a faulty connection.
- B0091 → Problems with the airbag control module → This code indicates that the control module itself has a malfunction that requires repair or replacement.
- B1231 → Event Threshold Exceeded – Threshold for airbag deployment exceeded → This code is set after an impact because the deployment threshold was exceeded and the system was active.
- B1499 → Airbag control unit detects airbag already deployed → The module reports that deployment has already occurred, which requires a reset for recovery.
- B1620 → Internal Error – Airbag ECU Replacement Required → This code signals a critical internal defect that often requires professional Dodge Omni P airbag control unit repair or replacement.
- 65535 → Intermittent Control Unit Memory Error → A temporary or recurring problem with the control unit's internal memory that may affect its functionality.
- Code 01 → Internal ECM (Electronic Control Module) Error → A generic code for internal problems with the Electronic Control Module of the airbag system.
- Code 02 → Driver Airbag Firing Circuit Error → This code indicates a problem in the driver airbag deployment circuit, which directly affects safety.
- Code 03 → Low voltage in the supply circuit → Insufficient power supply to the airbag control unit, which may impair its function and requires a check of the on-board voltage.
What part numbers are available for the Dodge Omni P airbag control unit repair?
Our sources do not have 100% verified OEM part numbers for the Dodge Omni P's central airbag control unit, making direct identification difficult; however, Mopar part numbers for airbag modules such as AK86JS8 and AK86JC5 exist, which are more related to steering wheel components.
Research revealed that Mopar OEM part numbers such as AK86JS8 for the "Air Bag And Horn Pad Module" or AK86JC5 for the "Sport Airbag Module" refer to units integrated into the steering wheel rather than the central control unit.
This means that for the Dodge Omni P airbag control unit repair, identification via the vehicle identification number (VIN) or direct consultation with specialized workshops is often necessary, since there is no unique OEM part number for the control unit itself.
Professional services that specialize in repairing Dodge Omni P airbag control units can often make the exact identification using internal databases or by looking at the removed module.