What is a Dodge Omni O24 airbag control module?
The Dodge Omni O24 airbag control unit is the central safety unit in the vehicle, precisely controlling the deployment of the airbags and seatbelt pretensioners in the event of a collision. It continuously monitors the crash sensors, stores event data, and ensures immediate activation of the occupant restraint systems to provide maximum safety.
This electronic module is designed for the Dodge Omni O24 series models, especially the sportier coupe version from 1979 to 1982.
It is crucial for the reliable function of the passive safety system and must be repaired or replaced after an accident or in the event of a defect.
Why is the Dodge Omni O24 airbag control unit defective?
The Dodge Omni O24 airbag control unit is often reported as defective after an accident because it stores crash data. Internal electronic failures due to aging or voltage problems are also common causes. A defect compromises safety and makes professional Dodge Omni O24 airbag control unit repair urgently necessary.
After an impact, the control unit stores indelible "hard codes" or crash data that require reinitialization or repair, even if the unit is mechanically intact.
Aging, corrosion of connectors or electrical surges in the 12-volt electrical system can also damage the internal components of the control unit and cause a failure.
Common error codes for Dodge Omni O24 airbag control unit repair
There are no publicly verified, specific trouble codes for the Dodge Omni O24 airbag control unit. However, general B-codes can indicate internal system or communication errors. An accurate diagnosis for Dodge Omni O24 airbag control unit repair requires manufacturer-specific diagnostic equipment and authorized repair shops.
Without access to official Mopar data, model-specific error codes for this specific control unit are not publicly documented.
However, generic B-codes (body codes) can occur during diagnosis, indicating general problems in the airbag control unit:
- B1000 → Control unit communication error → Problem with data transmission within the airbag system.
- B1010 → Internal control unit error → A defect in the internal electronics or software of the airbag control unit.
- B1100 → EEPROM memory error → Error in the non-volatile memory of the control unit, often after a crash.
- B1200 → Error in the crash data memory → The control unit cannot save or delete crash data correctly.
- B1300 → Control unit power supply error → Problem with the power supply of the airbag control unit.
What part numbers are available for the Dodge Omni O24 airbag control unit repair?
Publicly verified OEM part numbers for the Dodge Omni O24 airbag control module are not available. Found numbers such as AK86JS8 or AK86JC5 identify airbag modules, not the control module itself. Precise identification for Dodge Omni O24 airbag control module repair requires the vehicle identification number (VIN) and direct contact with a Mopar dealer.
The search for exact OEM part numbers for the Dodge Omni O24 airbag control unit was unsuccessful because the numbers found refer to other airbag components.
Therefore, if a Dodge Omni O24 airbag control unit repair is necessary, it is crucial to check the part number directly on the removed module or to perform a professional chassis number query.
| Part number | Manufacturer | type | Note for Dodge Omni O24 Airbag Control Unit Repair |
|---|---|---|---|
| AK86JS8 | Dodge/Mopar | Airbag module (horn pad with airbag) | Not explicitly identified as an airbag control unit (ECU). |
| AK86JC5 | Dodge/Mopar | Airbag sports airbag module | Not explicitly identified as an airbag control unit (ECU). |
Compatible models for Dodge Omni O24 airbag control unit repair
The Dodge Omni O24 airbag control unit repair is specifically designed for the Dodge Omni O24 sport coupe from 1979 to 1982. It is suitable for variants with 1.7-liter VW engines and 2.2-liter Chrysler engines. Compatibility depends on the vehicle's original airbag equipment.
The airbag control unit was developed for the three-door coupe version of the Dodge Omni, which is based on the same chassis as the standard Omni.
The modules fit vehicles equipped with the original 1.7-liter Volkswagen four-cylinder engine as well as those with the 2.2-liter Chrysler four-cylinder engine available from 1981.
How it works and what it can do with the Dodge Omni O24 airbag control unit repair
The Dodge Omni O24 airbag control unit receives signals from crash sensors, evaluates them, and controls airbag deployment. It incorporates safety logic to prevent false activations and enables self-diagnosis of system errors, which is essential for safety and a successful Dodge Omni O24 airbag control unit repair.
It continuously monitors the system to ensure precise deployment of the airbags and seat belt pretensioners in the event of an accident and to detect malfunctions.
The self-diagnosis function allows workshops with reading devices to identify any faults or interruptions in the airbag system, which enables targeted Dodge Omni O24 airbag control unit repair.
Installation position and connections of the Dodge Omni O24 airbag control unit
The Dodge Omni O24 airbag control unit is typically located in the steering wheel area or behind the dashboard to ensure short distances to sensors and airbags. It connects to the 12-volt electrical system and all airbag components via special connectors, an important aspect of Dodge Omni O24 airbag control unit repair.
The exact position can vary depending on the equipment; it is often installed near the steering wheel or in the center of the vehicle.
The connections include the power supply (+12V, ground), signal lines to the crash sensors, outputs to the airbag squibs and a diagnostic connection for workshop equipment.
Special features of the Dodge Omni O24 airbag control unit
For Dodge Omni O24 airbag control unit repairs, various module variants are available, which can differ in control system and design, for example, for sport airbags. Repaired modules represent a cost-effective alternative to purchasing a new one and offer full functionality, important for long-term safety and reliability.
Some control units may be specifically tuned to different airbag and horn combinations, such as standard or sport airbag modules.
Repair is a sustainable option that can be equivalent to buying a new one in terms of functionality and safety, as long as it is carried out by specialized workshops and includes an appropriate warranty.