What is a Dodge Daytona G airbag control module?
The Dodge Daytona G airbag control unit is the central safety unit that precisely controls and deploys occupant restraint systems such as airbags and seatbelt pretensioners in the event of an accident. It processes signals from crash sensors, stores relevant event data, and continuously monitors system integrity to ensure optimal safety.
The Airbag Control Module (SRS) in your Dodge Daytona G is a critical electronic component. It is specifically designed to activate the safety systems during a collision.
This unit continuously monitors inputs from various crash and acceleration sensors throughout the vehicle, ensuring quick and precise airbag deployment when necessary.
The module controls the firing of the airbag and seatbelt pretensioner circuits based on the received sensor data. It has multiple sensor interfaces that typically process inputs from three to six sensors.
In addition, depending on the vehicle configuration and equipment, it can monitor up to 16 ignition circuits. The device also performs continuous self-diagnosis.
If errors are detected, it activates the airbag warning light in the dashboard. After an accident, the module internally stores important crash event data and specific error codes.
Why is the Dodge Daytona G airbag control unit defective?
A Dodge Daytona G airbag control unit often fails because it stores crash data after an accident, requiring reprogramming. Age-related electronic faults, internal short circuits, or power supply issues can also cause failure, necessitating repair.
The most common cause of a defect is the storage of crash data after an impact. This so-called "hard code" prevents the system from functioning again without a professional reset.
In addition to accidents, internal electronic components can also fail due to age or environmental influences such as moisture. Problems with the wiring harness or fluctuations in the power supply can also disrupt the module's critical functions.
If your Dodge Daytona G has an illuminated airbag warning light without an accident, this often indicates an internal malfunction. Such problems affect the vehicle's passive safety.
Common error codes for Dodge Daytona G airbag control unit repair
During Dodge Daytona G airbag control unit repairs, common Dodge error codes often occur. These codes indicate communication problems with sensors or internal control unit errors. These codes are crucial for diagnosis. They indicate why the airbag system is malfunctioning or why the warning light is illuminated.
- B1000 → Control unit communication error → A malfunction in the data transmission within the airbag control unit or with other vehicle systems.
- B000113 → Driver Airbag Control Unit Error → A fault in the driver airbag circuit or module detected by the control unit.
- B000213 → Passenger Airbag Control Module Error → A problem in the passenger airbag circuit or module reported by the control module.
- B000313 → Driver Airbag Belt Pretensioner Circuit Fault → A malfunction in the driver's seat belt pretensioner electrical circuit is detected by the airbag control unit.
- U0170 → Loss of communication with front left sensor (Airbag ECU) → The control unit cannot communicate with the front left acceleration sensor.
- U0171 → Loss of communication with front right sensor (Airbag ECU) → The control unit is not receiving data from the front right acceleration sensor.
- U0172 → Loss of communication with left side crash sensor (airbag ECU) → The connection to the left side crash sensor is interrupted.
- U0175 → Loss of communication with right side crash sensor (airbag ECU) → Communication with the right side crash sensor is disrupted.
- U0184 → Loss of communication with radio (may affect airbag ECU) → Malfunction of the data connection between the airbag control unit and the radio, relevant for some systems.
These diagnostic trouble codes (DTCs) are commonly found in various Dodge vehicles. While not exclusive to the Dodge Daytona G, they provide valuable insight into airbag system malfunctions.
A professional OBD-II airbag diagnostic tool is essential for accurately reading and interpreting these codes. Given the lack of specific Daytona G OEM part numbers, consulting a specialized workshop is strongly recommended for precise troubleshooting.
What part numbers are available for the Dodge Daytona G airbag control unit repair?
There are currently no 100% verified, exact OEM part numbers listed specifically for the Dodge Daytona G airbag control unit. The numbers found often refer to airbag modules or are for other Dodge models. This complicates the Dodge Daytona G airbag control unit repair.
A search for a definitively verified OEM part number for the Dodge Daytona G airbag control unit did not yield any direct matches. The available results primarily list airbag components or control units for other Dodge models.
For example, Mopar part numbers AK86JS8 and AK86JC5 are identified for Dodge Daytona airbag modules (horn pads), but not for the central control unit. Similarly, 56054077AG is associated with a Dodge Charger SRS airbag computer control module, but not with the Daytona G.
The lack of specific OEM numbers requires careful verification for your Dodge Daytona G airbag control unit repair. It is recommended to contact Mopar directly or an authorized Chrysler/Dodge dealer.
Using professional databases like TecDoc with a vehicle identification number (VIN) can also help identify the correct part. Using unverified parts for your Dodge Daytona G airbag control unit repair may compromise the system's safety and functionality.