What is a Daihatsu Move Conte L585 airbag control unit?
The Daihatsu Move Conte L585 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle, making it crucial for your safety.
This specialized control unit processes signals from acceleration sensors and other safety-relevant components. It communicates via the vehicle network, typically a CAN bus, to transmit diagnostic data and status information.
Its real-time analysis of collision data ensures the precise and rapid deployment of airbags and seatbelt pretensioners when needed. The system is robustly built to withstand electromagnetic interference and vibrations.
Why is the Daihatsu Move Conte L585 airbag control unit defective?
The Daihatsu Move Conte L585 airbag control unit may be defective because it permanently stores crash data after an accident, internal components fail due to age, or electronic malfunctions occur. This then causes the airbag warning light to illuminate and the safety system to no longer function properly.
After a trigger, the control unit often stores so-called "crash data," making it impossible to use again without repair. Moisture or overvoltage can also damage internal components such as capacitors or memory chips.
An internal failure of the control logic or firmware problems can cause the control unit to no longer perform its functions. In many cases, repairing the defective control unit is a cost-effective alternative to purchasing a new one.
Common error codes for Daihatsu Move Conte L585 airbag control unit repair
When repairing the Daihatsu Move Conte L585 airbag control unit, specific B-codes are relevant. These indicate internal problems or communication errors within the control unit. These error codes directly indicate that the control unit itself is affected and requires diagnosis or repair.
- B1000 → Control unit communication error → Error in the data transmission of the airbag ECU
- B0091 → Control unit internal error problem → Internal defect or malfunction in the airbag ECU
- B0010 → Driver airbag circuit error → Problem with the driver airbag module circuit in the airbag ECU
- B0040 → Passenger airbag module error → Problem with the passenger airbag module circuit in the airbag ECU
These error codes are typically read via an OBD-II interface. They help the workshop diagnose the exact cause of the defect in the airbag control unit.
What part numbers are available for the Daihatsu Move Conte L585 airbag control unit repair?
For Daihatsu Move Conte L585 airbag control unit repairs, only specific, precisely verified OEM part numbers are relevant and suitable. These original part numbers are crucial to ensuring the correct function and compatibility of the repaired or replaced control unit.
The following original part numbers are confirmed by professional databases for the airbag control unit of the Daihatsu Move Conte L585:
- 89170-87410
- 89170-97403
- 89170-97407
- 89170-B2040
- 89170-B2060
These numbers are listed by suppliers such as Bosch and Autoliv as compatible airbag control units for this model. A successful Daihatsu Move Conte L585 airbag control unit repair should always refer to these verified numbers.