What is a Dacia Logan MCV I airbag control unit?
The Dacia Logan MCV I airbag control unit is the central safety unit installed in the vehicle and activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning and rapid deployment of all connected airbag modules and seatbelt pretensioners in the vehicle.
This electronic control unit is essential for the passive safety of the Dacia Logan MCV I. It coordinates the entire airbag system, from sensor data acquisition to triggering.
A functioning airbag control unit ensures that passengers are optimally protected in an emergency and that legal safety standards are met.
Why is the Dacia Logan MCV I airbag control unit defective?
A Dacia Logan MCV I airbag control unit often malfunctions because it stores crash data after an accident and then becomes locked, or due to age-related wear and tear on the internal electronics. Overvoltage or short circuits can also lead to failure, necessitating immediate Dacia Logan MCV I airbag control unit repair.
After the airbags are deployed, even in a minor accident, the control unit often needs to be replaced or reset because it stores data as irreversible.
Internal components can be damaged over time by temperature fluctuations or vibrations, which can lead to sudden system failure.
Common error codes for Dacia Logan MCV I airbag control unit repair
During Dacia Logan MCV I airbag control unit repairs, error codes typically occur that indicate internal problems or communication disruptions and require a precise diagnosis. These codes are crucial for locating the cause of a failure and enabling targeted repair.
- B1007 → Driver airbag firing circuit → Defect in the driver airbag firing circuit or the clock spring in the steering wheel.
- B1000 → Control unit communication error → General error in the internal or external communication of the airbag control unit.
- U1726 → No communication between airbag and ECU → The control unit cannot communicate with other vehicle systems via the CAN bus.
What part numbers are available for the Dacia Logan MCV I airbag control unit repair?
For the Dacia Logan MCV I airbag control unit repair, there are several verified original and OEM part numbers available to ensure correct compatibility with your vehicle model. It is crucial to match the exact number of your defective control unit to ensure trouble-free operation.
- 8201163278 → Dacia → Original OEM for Logan MCV I (KS), often without side airbags.
- 8200769222 → Dacia → Original/OEM, suitable for Dacia Logan MCV I with 1.6 engine.
- 6001551009 → Supplier* (presumably Autoliv/Bosch) → OEM reference number used in Dacia control units.
- 8201163282 → Dacia → Original OEM, another common part number.
- 985106332R → Dacia → Original OEM, alternative function, more for MCV II, but mentioned as a replacement for MCV I.
- 8200702320 → Dacia → Original OEM, airbag control unit for Dacia Logan I.
- 8200307188 → Dacia → Original OEM, airbag control unit for Dacia Logan I.
Technical specifications of the Dacia Logan MCV I airbag control unit
The Dacia Logan MCV I airbag control unit is specifically designed for the first generation of this model and provides robust control for the airbag system. It precisely processes sensor signals and reliably triggers the occupant protection systems when necessary to ensure maximum safety.
It is designed for an on-board voltage of 12 V and weighs approximately 1.0 kg, making it compact and easy to integrate.
The control unit is compatible with Dacia Logan MCV I models with 1.4L and 1.6L engines, such as the K7M 710 (1.6 MPI) and K7J 710 (1.4).
Compatible vehicles for Dacia Logan MCV I airbag control unit repair
The Dacia Logan MCV I airbag control unit repair primarily affects first-generation models built from approximately 2007 to 2012. A precise check of the chassis number is essential to ensure exact compatibility with the airbag control unit.
This control unit is primarily intended for the Dacia Logan MCV I (chassis KS).
There may also be compatibility with variants such as the Logan Pick-up or Sandero if they have similar engines and system architectures.
Functionality and features of the Dacia Logan MCV I airbag control unit repair
The functionality of the Dacia Logan MCV I airbag control unit relies on continuous monitoring of impact sensors to ensure lightning-fast response in the event of a collision. A Dacia Logan MCV I airbag control unit repair is often necessary when this critical functionality is impaired or errors are stored.
The device stores all system malfunctions as error codes that can be read out using diagnostic devices, making troubleshooting much easier.
After a replacement, the new control unit must be specifically coded and adapted to the vehicle by a specialist workshop to ensure full system functionality.
It also monitors the status of the airbag system and, if necessary, activates the warning indicator in the instrument cluster should there be a failure or malfunction.
Installation position and connections
The Dacia Logan MCV I airbag control unit is typically located under the center console, in front of the gearshift lever. This central location allows for short communication paths to all sensors and actuators, but is not always easily accessible for Dacia Logan MCV I airbag control unit repairs.
The control unit is installed in a secured module housing and has multi-pin connectors.
These connections are used for the supply voltage, the CAN bus communication and the cables to sensors (acceleration sensors) and actuators (airbags, belt tensioners).
During removal and installation, strict safety precautions must be observed, such as disconnecting the battery and avoiding electrostatic discharge.
Special features and variants
The airbag control unit for the Dacia Logan MCV I is available in several versions with slightly different part numbers, but there are no significant functional differences. A Dacia Logan MCV I airbag control unit repair is often a more cost-effective alternative to purchasing a new one if the defect can be repaired.
A simple plug-and-play replacement without programming is not possible in most cases; a specialist workshop is essential for coding.
Specialized workshops often offer control unit repairs to reduce costs for the vehicle owner.
It is important to note that this system does not support side airbags or newer generation airbags as it is based on the technology of the first generation Logan.