What is a Citroën Jumpy III airbag control unit?
The Citroën Jumpy III airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle, essential for safety.
This electronic module controls and monitors the entire airbag system based on real-time data from various crash sensors. It ensures that the airbags deploy reliably when needed.
After an accident, the control unit stores relevant crash data that can be read out for diagnostic purposes. This data must be professionally erased before the system is restarted.
If there are defects or stored crash data, the airbag warning light in the instrument cluster illuminates. Immediate inspection is essential for vehicle safety.
Why is the Citroën Jumpy III airbag control unit defective?
The Citroën Jumpy III airbag control unit often malfunctions because crash data is stored after an accident, causing the system to lock up. Internal hardware errors or power supply problems, which can be identified by specific error codes, can also lead to a failure of the safety electronics.
A common reason for failure is the storage of crash data after an impact. This prevents further function and triggers the airbag warning light.
Internal hardware failures, such as defects in the power supply circuit or communication, are also common causes. These lead to the failure of airbag system functions.
Communication problems with other vehicle systems or the diagnostic tool can also indicate a defect. Professional diagnostics at a workshop are crucial in these cases.
Common error codes for Citroën Jumpy III airbag control unit repair
During Citroën Jumpy III airbag control unit repairs, specific error codes typically occur that indicate internal defects, power supply issues, or communication failures within the control unit. These codes are crucial for precise diagnosis and targeted repair of the fault to restore full functionality of the airbag system.
- B0100 → Control unit defective → Internal hardware error in the airbag ECU
- B0102 → Open circuit/voltage loss ground → Problem in the control unit power supply circuit
- U1726 → No communication → Communication error between diagnostic device and airbag control unit
In addition to these error codes, the storage of crash data is often a problem. Although this isn't a typical error code, it blocks the system after an accident.
A precise diagnosis of these errors is essential for any Citroën Jumpy III airbag control unit repair. This is the only way to determine whether a replacement or a specific repair is necessary.
What part numbers are available for the Citroën Jumpy III airbag control unit repair?
For Citroën Jumpy III airbag control unit repairs, there are several verified OEM part numbers from Citroën/Peugeot and Bosch that ensure the replacement part's compatibility with the vehicle. These numbers are crucial for identifying and sourcing the correct control unit for flawless operation.
Citroën/Peugeot original OEM numbers: Part numbers 01393755080 and 9467160889 are listed specifically for the Citroën Jumpy III airbag control unit. The number 9645668680 is another common OEM number for Citroën/Peugeot control units, which is also used in Jumpy models.
Bosch Original OEM Module Numbers: Bosch part numbers 1401407880 and 0 285 010 556 are also installed as OEM modules in Citroën Jumpy vehicles. These may also require a Citroën Jumpy III airbag control unit repair.
When replacing or repairing a part, it is imperative to check the exact part number of the installed control unit. This ensures full compatibility and safety of the airbag system after the repair in the workshop.