What is a Citroën C3 IV airbag control unit?
The Citroën C3 IV airbag control unit is the central safety unit in the vehicle, continuously monitoring sensor data to rapidly deploy airbags and seatbelt pretensioners in the event of a collision. It is crucial for occupant safety and stores important crash data for accident analysis, which must be professionally erased after an accident.
This module, often referred to as the SRS-ECU (Supplemental Restraint System Electronic Control Unit), forms the heart of your Citroën C3's passive safety system. It receives signals from impact sensors throughout the vehicle.
Based on this information, the control unit calculates the severity of the impact and decides precisely which restraint systems should be activated for maximum protection.
Why is the Citroën C3 IV airbag control unit defective?
A Citroën C3 IV airbag control unit can fail for a variety of reasons, often after an accident, as it permanently stores crash data, necessitating reprogramming or hardware repair. Internal electronic errors, short circuits, or a faulty power supply can also lead to failure and require immediate Citroën C3 IV airbag control unit repair.
After an accident, the airbag control unit is no longer usable because it stores crash data (hard codes) in the error log, preventing further deployment. This is a safety feature that can only be reset by professionally repairing or replacing the module.
In addition, age-related wear and tear, moisture damage, or overvoltages in the vehicle electrical system can lead to internal defects that completely paralyze the system and require reliable diagnosis.
Common error codes for Citroën C3 IV airbag control unit repair
When diagnosing a faulty Citroën C3 IV airbag control unit, specific error codes may occur, indicating a malfunction in communication, internal circuitry, or the entire system. These codes activate the airbag warning light in the dashboard, making immediate Citroën C3 IV airbag control unit repair essential to protect vehicle occupants.
- U2601 → Driver side airbag firing circuit interruption → Defect in the firing circuit of the driver seat airbag, often caused by open circuits in the control unit.
- B1000 → Control unit communication error → General communication disruption with the airbag control unit, indicates an internal defect or failure.
- P106F → Permanent malfunction, e.g. passenger airbag deactivation → Manufacturer-specific code that signals a permanent malfunction in the airbag system, such as problems with the passenger airbag deactivation.
What part numbers are available for the Citroën C3 IV airbag control unit repair?
Various OEM part numbers are relevant for Citroën C3 IV airbag control unit repairs, which can vary depending on the vehicle's year of manufacture, engine type, and equipment. It is crucial to identify the exact part number of the original module to ensure a correct and compatible repair or replacement of the defective control unit.
These part numbers come directly from Citroën or their suppliers, such as Continental, and are suitable for various generations of the C3, including the IV models. An exact number match is essential for proper function after repair.
The list below contains verified part numbers that can be used for Citroën C3 airbag control unit repair, they are exclusively for SRS ECUs:
- 9651927380 (Citroën OEM, e.g. engine HFX, approx. 2004)
- 3090A8 (Citroën OEM, alternative to 9651927380)
- 9658316580 (Citroën OEM, e.g. engine 8HZ diesel, approx. 2005)
- 9656888580 (Citroën OEM, e.g. Citroën C3 Pluriel)
- 9651927580 (Citroën OEM)
- 98 189 580 80 (A2C98794903) (Continental OEM)
- 9824809680 (A2C98794904/05) (Continental OEM)
What does the Citroën C3 IV airbag control unit repair include?
Citroën C3 IV airbag control unit repair primarily involves professionally erasing the crash data stored in the module after an accident, as well as correcting any internal hardware or software errors to restore the safety system's full functionality. This is a cost-effective alternative to purchasing a new unit, allowing for quick vehicle re-commissioning.
After the defective control unit is removed, it is sent to a specialized workshop. There, the crash data is erased and the internal error log is cleared using manufacturer software.
The repair often also includes checking the electronics for cold solder joints or damaged components. The repaired module is then tested for full functionality before being reinstalled in the Citroën C3.
Advantages of Citroën C3 IV airbag control unit repair compared to new purchase
Repairing the Citroën C3 IV airbag control unit offers significant advantages over purchasing a new one. It's not only significantly more cost-effective, but also protects the environment by conserving resources and avoiding electronic waste. Furthermore, the vehicle-specific coding is retained, minimizing installation effort and potential compatibility issues.
A new control unit is often expensive and requires complex coding on the vehicle, as it is delivered unprogrammed. Repairing it, on the other hand, saves money and time for reprogramming.
By reusing the existing module, a sustainable approach is pursued that extends the service life of components. Professional repair of airbag control units is therefore an environmentally friendly and economically viable solution.
Where can I find professional help for Citroën C3 IV airbag control unit repair?
For professional Citroën C3 IV airbag control unit repairs, you should contact specialized workshops that have the necessary expertise and specialized diagnostic software. Look specifically for providers who specialize in airbag control unit repairs to ensure the highest safety standards and reliable troubleshooting.
Many workshops offer a mail-in repair service where you can send in your defective module. Look for certifications and positive customer reviews to find a qualified partner for your repair.
Online searches for "Citroën C3 airbag control unit repair" or "SRS ECU repair shop" can help you find the right specialist in your area.