What is a Citroën C3 III airbag control unit?
The Citroën C3 III airbag control unit is the central safety unit that instantly activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It monitors vehicle sensors, stores relevant crash data, and ensures the proper functioning of passive safety. A Citroën C3 III airbag control unit repair is often a cost-effective alternative.
This essential module is responsible for controlling the life-saving airbag systems in your Citroën C3 III. It receives signals from numerous sensors in the vehicle that detect a collision or impact.
In the event of an accident, the control unit precisely triggers the appropriate airbags and seatbelt pretensioners to provide optimal occupant protection. It is a key function for overall vehicle safety.
Why is the Citroën C3 III airbag control unit defective?
A Citroën C3 III airbag control unit is often defective because irreversible crash data is stored after an accident, preventing reinitialization. In this case, the airbag warning light remains permanently illuminated. Because internal electronic defects such as short circuits or overvoltage can also lead to failure, a professional Citroën C3 III airbag control unit repair is often the only solution to restore vehicle safety.
After a collision, the control unit stores so-called crash data, which makes reuse of the device impossible without a special reset procedure.
Even without an accident, the control unit can fail, for example, due to aging components, moisture ingress, or electrical problems such as short circuits or overvoltage in the vehicle's electrical system. These internal errors lead to system failure.
A defective control unit prevents the airbags and seatbelt pretensioners from functioning properly and must therefore be repaired or replaced. A diagnostic check at a workshop is the first step.
Common error codes for Citroën C3 III airbag control unit repair
For Citroën C3 III airbag control unit repairs, specific error codes are primarily relevant, as they directly indicate problems with the control unit. These indicate communication errors, internal malfunctions, or ignition circuit interruptions and require precise diagnosis to identify the cause of the failure.
Diagnosis of a defective airbag control unit is performed via the OBD2 interface using specialized software. Here are the most common, purely control unit-specific error codes:
- B1000 → Control unit communication error → The airbag ECU does not respond to diagnostic signals or is internally faulty.
- U2601 → Driver level 1 airbag ignition circuit interruption (Igniter Open Circuit) → A fault in the ignition circuit of the driver airbag managed by the control unit.
Especially after an accident, the control unit's error log is filled with crash data, which is also displayed as error codes and blocks the system. These must be professionally erased.
Error codes from external components such as sensors or belt tensioners are excluded here, as they do not directly indicate a defect in the control unit itself.
What part numbers are available for the Citroën C3 III airbag control unit repair?
The Citroën C3 III airbag control unit repair takes into account various OEM part numbers, which vary depending on the model year and equipment. These numbers, from Citroën or suppliers such as Temic/Bosch, are crucial for correct compatibility and ensure that the repaired control unit fits exactly the specific Citroën C3 III.
For the modern Citroën C3 III (model from approx. 2016/2019), suitable for engine variants such as 1.2 VTi and 1.2 PTEC, the following original part numbers are primarily relevant:
- 9829442880 (Citroën original OEM)
- 1663836480 (Citroën (GPA) original OEM)
Other common OEM numbers that are also relevant for older Citroën C3 models (e.g. model years 2004, 2005) and can also be repaired include:
- 9656888580 (Citroën original OEM)
- 9651927380 (Citroën original OEM)
- 9658316580 (Citroën original OEM)
- 00006545P3 (Citroën original OEM)
Part numbers from suppliers such as Temic or Bosch, which were installed as OEM parts and are relevant for the Citroën C3 III airbag control unit repair, are also:
- 96 772 534 80 (Temic/Bosch original OEM)
- 96 490 035 80 (Temic/Bosch original OEM)
All part numbers listed correspond to airbag control units (ECUs) and are essential for correct identification during repair or replacement. A thorough check with the vehicle identification number (VIN) is always recommended to ensure a perfect fit.