What is a Chrysler Voyager RT airbag control module?
The Chrysler Voyager RT airbag control unit is the central safety unit in vehicles from 2007 to 2016, which activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules for maximum passenger safety.
This control unit is specifically designed for the Chrysler Grand Voyager RT with the 2.8 CRD engine. It is essential for the precise control of the entire airbag system.
Its primary task is to detect the intensity of a collision and deploy the airbags and seatbelt pretensioners in a targeted manner. This happens within milliseconds to provide optimal protection for the occupants.
Why is the Chrysler Voyager RT airbag control unit defective?
A Chrysler Voyager RT airbag control unit is often defective because it stores crash data after an accident that needs to be erased, or internal electronic damage can occur due to overvoltage or aging. This often leads to a permanently illuminated airbag light and requires a professional Chrysler Voyager RT airbag control unit repair.
Common causes of a defect include the storage of collision data after an accident, which deactivates the system. Moisture or age-related material fatigue can also damage the sensitive electronics inside.
A failure may be indicated by an illuminated airbag warning light, even if there is no visible damage. In such cases, a precise diagnosis is essential to restore functionality.
Common error codes for Chrysler Voyager RT airbag control unit repair
There are no universally published, specific trouble codes for the Chrysler Voyager RT airbag control unit; a precise diagnosis requires reading the error log with a professional diagnostic tool. General codes may indicate communication problems or sensor failures, which may require a Chrysler Voyager RT airbag control unit repair.
- **U1213-00** → Communication faulty → Interruption in the CAN bus or internal control unit defect.
- **U11EA-00** → Left B-pillar impact sensor communication lost → Defective sensor, broken wire, or control unit cannot receive the signal.
- **B1CBA** → Crash data saved → Control unit has registered an impact and must be reset or replaced.
- **B1B00** → Control unit internal error → An internal hardware or software error requires a Chrysler Voyager RT airbag control unit repair.
What part numbers are available for Chrysler Voyager RT airbag control unit repair?
Exact, 100% verified OEM part numbers for the Chrysler Voyager RT airbag control module are difficult to find in publicly available catalogs. For accurate identification, it is recommended to obtain the Vehicle Identification Number (VIN) from an authorized Chrysler dealer to ensure the correct Chrysler Voyager RT airbag control module repair.
The part numbers provided refer to airbag components such as driver or side airbags, but not directly to the control unit itself. These are, for example, 68186542AH or 5VP651X9AF for the driver airbag.
Since there are no specific control unit part numbers for the RT, checking the VIN at the manufacturer or a specialized repair shop is the safest way. This helps avoid errors during Chrysler Voyager RT airbag control unit repair.