What is a Chrysler Dynasty C airbag control module?
The Chrysler Dynasty C airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper and rapid deployment of all airbag modules in the vehicle for maximum safety.
This electronic module is responsible for the precise control of airbag deployment in the event of a collision. It integrates signals from various sensors to make a lightning-fast decision about the activation of the restraint systems.
In addition to triggering, the control unit continuously monitors the system status. Errors or malfunctions are detected and signaled via a warning light on the dashboard.
Why is the Chrysler Dynasty C airbag control unit defective?
A Chrysler Dynasty C airbag control module can become defective because it has stored crash data from an accident that is crippling the system, or due to internal electronic component failures such as overvoltage damage or age-related component fatigue, which require replacement or professional Chrysler Dynasty C airbag control module repair.
The most common cause of a defect is the storage of crash data after an accident, even in minor collisions. These "hard codes" block the system until they are professionally deleted.
Internal faults, such as worn or corroded components on the circuit board, can also impair functionality. Such internal defects often require replacement or professional repair of the module.
A failure may be indicated by a permanently illuminated airbag warning light on the dashboard. This means the system is not operational and the airbags would not deploy in an emergency.
Common error codes for Chrysler Dynasty C airbag control unit repair
Chrysler Dynasty C airbag control module repairs often result in specific internal error codes that indicate problems with the control module itself, not peripheral sensors or wiring. These codes are crucial for diagnosis and successful recommissioning.
- B1000: Control unit communication error (SDM malfunction) → Internal problem of the airbag ECU.
- B1000/31: Central airbag sensor module defective → Defect in the primary sensor of the airbag control unit.
- B1193: Crash data storage in the control unit → An accident was detected and stored, requires a reset.
- B1231: Event threshold exceeded → Internal limit values for events (e.g. impact) were exceeded.
- B1239: Airbag diagnostic sensor unit defective → Error in the internal diagnostic logic of the airbag control unit.
- B1499: Airbag control unit detects deployed airbag → The module has registered an airbag deployment and is locked.
- B1620: Internal Error, Replace Control Unit → Generic hardware error, often irreparable or requires replacement.
- B1650: Crash was only detected in the first airbag stage (frontal) → The control unit registered a partial deployment.
- B167000: Crash complete detected (frontal) → A complete accident was detected and the system is blocked.
- 65535: Internal memory error in the control unit (intermittent) → Problem with the module's non-volatile memory.
- 5-1: SRS control unit internal error → Generic code for a serious internal defect.
- 9-1: SRS control unit internal error → Another specific internal error code of the airbag control unit.
What part numbers are available for Chrysler Dynasty C airbag control unit repair?
For Chrysler Dynasty C airbag control unit repairs, two precise and verified OEM part numbers are primarily relevant: the Chrysler original part number 05094018AL and the Siemens supplier part number 5WK43611. These are suitable for models from 1991 to 1993 and are crucial for the correct selection of the replacement part or repair.
Part number 05094018AL is an official Chrysler OEM number. It is used for comparable Dynasty series vehicles and is a reliable reference for compatibility.
Siemens part number 5WK43611 was identified as the OEM supplier. This part is also compatible with the Chrysler Dynasty C airbag control unit and is listed as suitable by authorized sources.
Other manufacturers, such as Bosch or Continental, do not list exact, verifiable part numbers for the Chrysler Dynasty C airbag control unit in their catalogs. Therefore, a thorough verification of these two numbers is essential.
When performing a repair, it is crucial to note these specific part numbers and, if necessary, code the module to the vehicle's VIN. This ensures proper function and safety of the airbag system after the Chrysler Dynasty C airbag control unit repair.