What is a Chrysler 300M LR airbag control unit?
The Chrysler 300M LR airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle to ensure maximum occupant safety.
This electronic module, often referred to as the SRS (Supplemental Restraint System) module, is the "brain" of the airbag system. It receives signals from the impact sensors and deploys the airbags and seatbelt pretensioners when necessary.
The unit also continuously performs self-diagnostics to monitor system readiness. Errors or malfunctions are signaled to the driver via an indicator light on the dashboard.
Why is the Chrysler 300M LR airbag control unit defective?
A Chrysler 300M LR airbag control unit often fails because it stores crash data after an accident that needs to be erased, or because internal components fail due to age, overvoltage, or moisture. The system can then no longer control the airbags correctly or reports persistent errors, requiring professional Chrysler 300M LR airbag control unit repair.
The most common cause of a defect is the storage of "crash data" after a collision, even in minor impacts. This data blocks the control unit and prevents further operation until it is professionally reset.
Internal defects such as EEPROM errors, processor malfunctions, or power supply problems can also occur. This damage is often due to aging, vibrations, or electrical problems in the vehicle.
Moisture or corrosion can also cause short circuits or malfunctions in the module. A precise diagnosis is essential for a successful Chrysler 300M LR airbag control unit repair.
Common error codes for Chrysler 300M LR airbag control unit repair
When repairing the Chrysler 300M LR airbag control module, specific error codes are crucial. They indicate internal control module problems or communication failures. These codes help diagnose whether the module itself is defective or if crash data simply needs to be erased, allowing for precise troubleshooting and simplifying the repair.
- B1000 → Control unit communication error → Cause: Damaged wiring or internal module defect.
- B1001 → Internal memory error in the airbag control unit → Cause: Defective EEPROM memory chip or internal data corruption.
- B1002 → Error in the control unit software → Cause: Corrupt firmware or update error in the module.
- B1003 → EEPROM write/read error → Cause: Hardware defect in the memory module.
- B1010 → Missing or interrupted CAN communication → Cause: Bus line break or internal communication module defective.
- B1015 → Airbag control unit power supply unstable → Cause: Voltage fluctuations or defective power supply to the module.
- B1020 → Internal self-test of the control unit failed → Cause: Serious internal defect of the control unit.
- B1100 → Control unit "not programmed" or programming error → Cause: Incorrect software installation or missing programming after module replacement.
- B1200 → Crash data stored in the control unit → Cause: Accident detection and blockage of the module.
- B1400 → Error deleting crash data → Cause: Internal memory error or faulty reset attempt.
- U0151 → Loss of communication with airbag control unit → Cause: Interruption of the CAN bus line to the airbag control unit or module failure.
What part numbers are available for Chrysler 300M LR airbag control unit repair?
Several specific OEM part numbers are relevant for Chrysler 300M LR airbag control unit repair, ensuring exact compatibility and enabling successful repair or replacement of the defective module. These include both Chrysler's own and Bosch supplier numbers, which are validated for the 2001 model year with the 2.7L engine and used to repair the airbag control unit.
The exact part number is crucial for proper function after a Chrysler 300M LR airbag control unit repair. Always compare the number on your old module.
Below you will find the exact OEM part numbers for the Chrysler 300M LR airbag control unit (especially model year 2001 with 2.7L engine):
- 04602430AE (Chrysler/Bosch OEM)
- 0285001367 (Bosch OEM No., identical to 04602430AE)
- 04602430AF (Chrysler / Bosch OEM, used replacement number)
- 343278 (Chrysler / Bosch OEM, spare part number)
- 04896371AA (Chrysler / Bosch OEM, Airbag Module for 300M)
Please note that newer Chrysler 300 models use different part numbers. For example, 68371751AA or 68105510AE (Bosch 0285011467) are valid for later model years of the Chrysler 300, but not for the 300M LR.