What is an Audi A5 8TA Sportback airbag control unit?
The Audi A5 8TA Sportback airbag control unit is the central safety unit that activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It monitors sensors, stores important crash data, and ensures the correct functioning of the restraint system. A professional Audi A5 8TA Sportback airbag control unit repair is essential for your safety.
This electronic module continuously receives signals from acceleration sensors in the vehicle. Based on this data, it decides within milliseconds whether to trigger the passive safety systems.
In addition, the control unit performs continuous self-diagnosis. It monitors all connected components and communication lines to immediately detect system errors.
Why is the Audi A5 8TA Sportback airbag control unit defective?
The Audi A5 8TA Sportback airbag control unit can become defective, often after an accident due to stored crash data, but also due to internal component failures or overvoltage. A defect usually results in the airbag warning light remaining permanently illuminated and the safety system being disabled. An urgent Audi A5 8TA Sportback airbag control unit repair is then necessary.
The most common cause of failure is crash data stored after an accident, even in minor collisions. This data prevents the device from functioning properly and must be professionally deleted.
Internal electronic defects or age-related wear and tear can also lead to a faulty control unit. Problems with the power supply or CAN bus communication are also typical causes of failure and require a precise diagnosis.
Common error codes for Audi A5 8TA Sportback airbag control unit repair
When diagnosing a faulty Audi A5 8TA Sportback airbag control unit, specific error codes arise. These indicate internal defects, communication problems, or malfunctions. These codes are crucial for precise error analysis and successful Audi A5 8TA Sportback airbag control unit repair, as they narrow down the cause of the problem.
- 00003 → Control unit defective → Typical error with a damaged or non-functional airbag control unit, prevents error memory deletion.
- 00588 → Airbag igniter driver side (N95) resistance too high/low → Often indicates a control unit or wiring fault in the airbag igniter circuit.
- 01217 → Airbag igniter side airbag driver (N199) → Signals control unit errors or wiring problems in the control of the side airbag.
- 65535 → Control unit defective → Manufacturer-specific code that indicates a general defect in the airbag control unit, often after an accident.
- B200049 → Control unit defective → Indicates a defect in the control unit, also in conjunction with stored crash data.
- U1726 → No communication with airbag control unit → Communication failure (usually CAN bus) to the control unit, reported by the control unit itself.
- A00049-89 → Control unit defect (manufacturer-specific) → Indicates a defect in the control unit, may be related to crash data or communication problems.
These codes are directly attributable to the airbag control unit and not to other airbag components such as sensors or seatbelt pretensioners. A precise diagnosis is the first step to a successful repair.
When these error codes occur, a detailed inspection of the control unit at a specialist workshop is usually required. Many of these problems can be resolved with a professional Audi A5 8TA Sportback airbag control unit repair.
What part numbers are available for the Audi A5 8TA Sportback airbag control unit repair?
For Audi A5 8TA Sportback airbag control unit repairs, specific OEM and supplier part numbers are relevant to ensure compatibility with your vehicle model. Correct identification of the part number is crucial to ensuring the correct replacement part or repair method and avoiding incorrect purchases.
Only part numbers that have been precisely tested and validated for the Audi A5 8TA Sportback (approx. model year 2011–2013) were taken into account.
These numbers are confirmed multiple times in Audi original parts records and supplier lists and guarantee compatibility for a successful repair.
- 8K0959655N (Audi/Bosch Original/OE) – This is the most common OEM number for the airbag control unit in the Audi A5 8TA Sportback.
- 5WK44637 (Bosch supplier) – The corresponding Bosch part number for the 8K0959655N.
- 8K0959655B (Audi/Bosch Original/OE) – An alternative, also compatible OEM number for the airbag control unit.
- 5WK43749 (Bosch supplier) – The corresponding Bosch part number for the 8K0959655B.
It is important to use only these verified part numbers for repair or replacement. Incorrect or insufficiently verified numbers have been intentionally excluded.
Using these numbers, you can be sure that you will receive an airbag control unit that is specifically designed for your Audi A5 8TA Sportback, thus enabling a safe repair.