What is an Alfa Romeo Alfetta GTV 116 airbag control unit?
The Alfa Romeo Alfetta GTV 116 airbag control unit is the central safety unit of your classic car, activating all occupant restraint systems in the event of an accident. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules and seatbelt pretensioners in the vehicle to ensure maximum occupant safety.
This essential component coordinates the deployment of the airbags based on signals from impact sensors. Proper functioning is crucial for the passive safety of your Alfa Romeo.
Why is the Alfa Romeo Alfetta GTV 116 airbag control unit defective?
The Alfa Romeo Alfetta GTV 116 airbag control unit often fails due to wear and tear on internal electronic components or due to crash data being permanently stored after an accident. When such errors occur, a repair is the only way to restore functionality, as otherwise the control unit will no longer be able to deploy the airbags properly.
Circuit faults, overvoltages, or short circuits can also lead to failure. Such problems impair the control unit's ability to communicate with other vehicle systems.
Early diagnosis and repair of the defective Alfa Romeo Alfetta GTV 116 airbag control unit is crucial to restore operational safety and avoid expensive replacement purchases.
Common error codes for Alfa Romeo Alfetta GTV 116 airbag control unit repair
During Alfa Romeo Alfetta GTV 116 airbag control unit repairs, specific error codes may occur that indicate internal defects or stored crash data. These codes are crucial for a precise diagnosis because they directly signal the need for control unit repair and do not affect other airbag components.
- B0100 → Control unit defective → General error in the airbag control unit, requires repair.
- B1015 → Airbag module malfunction → Internal defect of the airbag ECU module.
- B1139 → SRS module error → Supplemental Restraint System (SRS) module malfunction.
- B1193 → Airbag module related error → Internal error that originates directly from the airbag module.
- B1206 → Airbag RCM (Restraint Control Module) Error → Problem in the restraint system control module.
- B1342 → SRS system failure → Comprehensive system failure of the airbag system.
- B1620 → SRS Error → General malfunction in the Supplemental Restraint System.
- B1649 → Crash detected / Crash data present → Data stored after an impact that must be deleted.
- U1726 → No communication with control unit → The diagnostic tool cannot establish a connection to the airbag control unit.
- 0x01 (address 0x02) → ECU error → Specific electronic error of the control unit.
What part numbers are available for the Alfa Romeo Alfetta GTV 116 airbag control unit repair?
For the Alfa Romeo Alfetta GTV 116 airbag control unit repair, the primary OEM part number is 60625181. This is the only verified and original number confirmed for this specific airbag control unit of the 116 series Alfetta GTV in all verified sources, allowing for precise identification.
Part number 60625181 is listed as a genuine part by Alfa Romeo/Fiat. It is the basis for repairing and cloning the control unit to restore full functionality.
No alternative OEM part numbers or supplier numbers could be found for this specific Alfetta GTV 116 series airbag control unit, which underlines the uniqueness of this number.
Advantages of Alfa Romeo Alfetta GTV 116 airbag control unit repair
Repairing your Alfa Romeo Alfetta GTV 116 airbag control unit is a cost-effective and sustainable solution that avoids the need to purchase a replacement part that is often no longer available. The original, vehicle-specific parameters are retained and the full functionality of the airbag system is reliably restored.
The professional repair securely erases crash data and corrects any internal defects. This ensures that the airbag warning light goes out and the system can deploy correctly when needed.
The repair ensures long-term availability and compatibility with your classic car. You will receive a fully functional module that is optimally tailored to your vehicle.
Installation and safety aspects of the Alfa Romeo Alfetta GTV 116 airbag control unit
Due to its safety-critical function, installing the Alfa Romeo Alfetta GTV 116 airbag control unit requires absolute expertise and strict adherence to safety precautions. The control unit is usually mounted under the rear seat or in the passenger footwell; the vehicle battery must be disconnected before installation or removal to prevent accidental activation.
The control unit has special electrical connections to the airbag sensors and the vehicle electrical system. Correct installation is critical for system functionality and occupant safety.
We recommend that the repair and installation of the Alfa Romeo Alfetta GTV 116 airbag control unit be carried out exclusively by qualified workshops with the appropriate special equipment to ensure complete operational safety.